On Mon, Jan 27, 2025 at 02:34:08PM +0100, Luca Weiss wrote:
> On maandag 27 januari 2025 10:44:19 Midden-Europese standaardtijd Stephan
> Gerhold wrote:
> > On Sun, Jan 26, 2025 at 09:57:28PM +0100, Luca Weiss wrote:
> > > From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
> > >
> > > Enable modem remoteproc on samsung,matisse-wifi & matisselte.
> > >
> > > Signed-off-by: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
> > > Signed-off-by: Luca Weiss <luca@xxxxxxxxxxxx>
> > > ---
> > > arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi | 7 +++++
> ++
> > > 1 file changed, 7 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-
> common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> > > index fbd568c7d6b7415d240aa1a2329d07cf9135274c..
> 4155bfb2136022f2a85d69451c34f06ed2a700ac 100644
> > > --- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> > > +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> > > @@ -225,6 +225,13 @@ &blsp1_uart3 {
> > > status = "okay";
> > > };
> > >
> > > +&modem {
> > > + mx-supply = <&pm8226_l3>;
> > > + pll-supply = <&pm8226_l8>;
> >
> > Hmmmmm, so I was looking at msm8926.dtsi downstream and it seems to
> > override the msm8226.dtsi modem/mss definition [1]:
> >
> > 1. ext-bhs-reg is dropped
> > 2. vdd_mss-supply is added
>
> That's the same what I found, and have working with more (currently hacky)
> patches on msm8926-htc-memul. I decided against introducing it with this
> series since these patches have been pending for too long and initially when I
> was doing 8926, I wasn't sure how to make this into a proper patch. Now my
> idea is to introduce a "static const struct rproc_hexagon_res msm8926_mss"
> with the compatible qcom,msm8926-mss-pil which has these two differences.
> I think that's a better idea than adding some extra conditionals around to
> make the mss-supply optional and ext-bhs somehow optional in the driver based
> on dt.
>
Yeah, that sounds good. Could add a new qcom-msm8926.dtsi include that
overrides the compatible and /delete-property/ the ext-bhs-reg. Then
just #include that only for matisselte and add the mss-supply there.
> >
> > This common include seems to cover both apq8026 (matissewifi) and
> > msm8926 (matisselte).
>
> That's a very good point. I didn't think much about the matisse patches since
> they were introduced by Matti but yes... Either I add the msm8926 support in
> the same series already, or we just enable modem for matissewifi for now. I
> think I'll opt for the latter since the series is already 9 patches long and I
> don't want to make it too complicated.
>
Either way is fine for me. I guess I'd personally throw it in one
series, just because it fits well together and it can take quite some
time to get patches applied. :-)
Thanks,
Stephan
