Resending the below reviewed patches after fixing the regulator warnings in v7 P1. - Patch 1/2 Add and enable BT node for qcs6490-rb3gen board. - Patch 2/2 Use the power sequencer for wcn6750. ---- Changes from v7: * updated P1 & P2 with tag: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> * Link to v7: https://lore.kernel.org/lkml/20250107134157.211702-1-quic_janathot@xxxxxxxxxxx/#t Changes from v6: * Elaborated the commit message with more information. * Link to v6: https://lore.kernel.org/lkml/20241223135700.22660-1-quic_janathot@xxxxxxxxxxx/ Changes from v5: * Update the wcn6750 required properties in bindings. * Link to v5: https://lore.kernel.org/linux-arm-msm/20241209103455.9675-1-quic_janathot@xxxxxxxxxxx/ Changes from v4: * Added reviewed tag by Krzysztof in p1 * Updated the p2 commit message with sw_ctrl and wifi-enable are handled in wifi FW. * Added blank line between the nodes in p2 * Placed the structures in proper order in p4 * Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@xxxxxxxxxxx/ Changes from v3: * Defined the PMU node and used the its output to power up BT * Used power sequencer for wcn wcn6750 module * Split the patch to multiple as per subtree * Add description of the PMU of the WCN6750 module * Include separate UART state node for sleep pin configuarion * Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@xxxxxxxxxxx/ Changes from v2: * Sorted nodes alphabetically * Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@xxxxxxxxxxx/ Changes from v1: * Corrected the board name in subject * Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@xxxxxxxxxxx/ Janaki Ramaiah Thota (2): arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node Bluetooth: hci_qca: use the power sequencer for wcn6750 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 ++++++++++++++++++- drivers/bluetooth/hci_qca.c | 2 +- 2 files changed, 168 insertions(+), 2 deletions(-) --
