From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
(Almost?) all QMP PHYs come with both a "full reset" ("phy") and a
"retain certain registers" one ("phy_nocsr").
Drop the maxItems=1 constraint for resets and reset_names as we go
ahead and straighten out the DT usage. After that's done (which
will involve modifying some clock drivers etc.), we may set
*min*Items to 2, bar some possible exceptions.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
.../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 24 ----------------------
1 file changed, 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index f1ffc3d5cae44b8a9c96cdcd749a6e54533c94f6..c42143bd139e30d1beabc9099d0dde17128413bf 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -204,30 +204,6 @@ allOf:
clock-names:
minItems: 7
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sm8550-qmp-gen4x2-pcie-phy
- - qcom,sm8650-qmp-gen4x2-pcie-phy
- - qcom,x1e80100-qmp-gen4x2-pcie-phy
- - qcom,x1e80100-qmp-gen4x4-pcie-phy
- - qcom,x1e80100-qmp-gen4x8-pcie-phy
- - qcom,x1p42100-qmp-gen4x4-pcie-phy
- then:
- properties:
- resets:
- minItems: 2
- reset-names:
- minItems: 2
- else:
- properties:
- resets:
- maxItems: 1
- reset-names:
- maxItems: 1
-
- if:
properties:
compatible:
--
2.48.1
