This series introduces initial support for the Ingenic JZ4780 SoC and
the Imagination Technologies MIPS Creator CI20 board which is built
around it. In the process the existing JZ4740 & qi_lb60 code gains
initial support for using DeviceTree such that much of the existing
platform code under arch/mips/jz4740 can be shared.
The series applies atop next-20150421. Review appreciated, and
hopefully this can make it in for v4.2.
Thanks,
Paul
Paul Burton (37):
devicetree/bindings: add Ingenic Semiconductor vendor prefix
devicetree/bindings: add Qi Hardware vendor prefix
MIPS: JZ4740: introduce CONFIG_MACH_INGENIC
MIPS: ingenic: add newer vendor IDs
MIPS: JZ4740: require & include DT
MIPS: irq_cpu: declare irqchip table entry
MIPS: JZ4740: probe CPU interrupt controller via DT
MIPS: JZ4740: use generic plat_irq_dispatch
MIPS: JZ4740: move arch_init_irq out of arch/mips/jz4740/irq.c
devicetree: document Ingenic SoC interrupt controller binding
MIPS: JZ4740: probe interrupt controller via DT
MIPS: JZ4740: parse SoC interrupt controller parent IRQ from DT
MIPS: JZ4740: register an irq_domain for the interrupt controller
MIPS: JZ4740: drop intc debugfs code
MIPS: JZ4740: remove jz_intc_base global
MIPS: JZ4740: support >32 interrupts
MIPS: JZ4740: define IRQ numbers based on number of intc IRQs
MIPS: JZ4740: read intc base address from DT
MIPS: JZ4740: avoid JZ4740-specific naming
MIPS: JZ4740: support newer SoC interrupt controllers
irqchip: move Ingenic SoC intc driver to drivers/irqchip
MIPS: JZ4740: call jz4740_clock_init earlier
MIPS: JZ4740: replace use of jz4740_clock_bdata
devicetree: add Ingenic CGU binding documentation
clk: ingenic: add driver for Ingenic SoC CGU clocks
MIPS,clk: migrate JZ4740 to common clock framework
MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cgu
MIPS,clk: move jz4740 UDC auto suspend functions to jz4740-cgu
MIPS,clk: move jz4740 clock suspend,resume functions to jz4740-cgu
clk: ingenic: add JZ4780 CGU support
MIPS: JZ4740: remove clock.h
MIPS: JZ4740: only detect RAM size if not specified in DT
devicetree: document Ingenic SoC UART binding
serial: 8250_ingenic: support for Ingenic SoC UARTs
MIPS: JZ4740: use Ingenic SoC UART driver
MIPS: ingenic: initial JZ4780 support
MIPS: ingenic: initial MIPS Creator CI20 support
.../devicetree/bindings/clock/ingenic,cgu.txt | 53 ++
.../bindings/interrupt-controller/ingenic,intc.txt | 25 +
.../devicetree/bindings/serial/ingenic,uart.txt | 22 +
.../devicetree/bindings/vendor-prefixes.txt | 2 +
arch/mips/Kconfig | 11 +-
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/ingenic/Makefile | 10 +
arch/mips/boot/dts/ingenic/ci20.dts | 21 +
arch/mips/boot/dts/ingenic/jz4740.dtsi | 68 ++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 101 +++
arch/mips/boot/dts/ingenic/qi_lb60.dts | 15 +
arch/mips/configs/ci20_defconfig | 169 ++++
arch/mips/configs/qi_lb60_defconfig | 3 +-
arch/mips/include/asm/cpu-type.h | 2 +-
arch/mips/include/asm/cpu.h | 6 +-
arch/mips/include/asm/mach-jz4740/clock.h | 3 +
.../asm/mach-jz4740/cpu-feature-overrides.h | 3 -
arch/mips/include/asm/mach-jz4740/irq.h | 14 +-
arch/mips/include/asm/mach-jz4740/platform.h | 2 -
arch/mips/jz4740/Kconfig | 17 +-
arch/mips/jz4740/Makefile | 8 +-
arch/mips/jz4740/Platform | 8 +-
arch/mips/jz4740/board-qi_lb60.c | 7 -
arch/mips/jz4740/clock-debugfs.c | 108 ---
arch/mips/jz4740/clock.c | 924 ---------------------
arch/mips/jz4740/clock.h | 76 --
arch/mips/jz4740/gpio.c | 7 +-
arch/mips/jz4740/irq.c | 162 ----
arch/mips/jz4740/platform.c | 38 +-
arch/mips/jz4740/pm.c | 2 -
arch/mips/jz4740/prom.c | 13 -
arch/mips/jz4740/reset.c | 13 +-
arch/mips/jz4740/serial.c | 33 -
arch/mips/jz4740/serial.h | 23 -
arch/mips/jz4740/setup.c | 36 +-
arch/mips/jz4740/time.c | 19 +-
arch/mips/kernel/cpu-probe.c | 4 +-
arch/mips/kernel/irq_cpu.c | 3 +
drivers/clk/Makefile | 1 +
drivers/clk/ingenic/Makefile | 3 +
drivers/clk/ingenic/cgu.c | 712 ++++++++++++++++
drivers/clk/ingenic/cgu.h | 223 +++++
drivers/clk/ingenic/jz4740-cgu.c | 303 +++++++
drivers/clk/ingenic/jz4780-cgu.c | 736 ++++++++++++++++
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ingenic.c | 171 ++++
drivers/tty/serial/8250/8250_ingenic.c | 261 ++++++
drivers/tty/serial/8250/Kconfig | 9 +
drivers/tty/serial/8250/Makefile | 3 +
include/dt-bindings/clock/jz4740-cgu.h | 37 +
include/dt-bindings/clock/jz4780-cgu.h | 88 ++
.../irq.h => include/linux/irqchip/ingenic.h | 8 +-
53 files changed, 3169 insertions(+), 1424 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ingenic,cgu.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
create mode 100644 Documentation/devicetree/bindings/serial/ingenic,uart.txt
create mode 100644 arch/mips/boot/dts/ingenic/Makefile
create mode 100644 arch/mips/boot/dts/ingenic/ci20.dts
create mode 100644 arch/mips/boot/dts/ingenic/jz4740.dtsi
create mode 100644 arch/mips/boot/dts/ingenic/jz4780.dtsi
create mode 100644 arch/mips/boot/dts/ingenic/qi_lb60.dts
create mode 100644 arch/mips/configs/ci20_defconfig
delete mode 100644 arch/mips/jz4740/clock-debugfs.c
delete mode 100644 arch/mips/jz4740/clock.c
delete mode 100644 arch/mips/jz4740/clock.h
delete mode 100644 arch/mips/jz4740/irq.c
delete mode 100644 arch/mips/jz4740/serial.c
delete mode 100644 arch/mips/jz4740/serial.h
create mode 100644 drivers/clk/ingenic/Makefile
create mode 100644 drivers/clk/ingenic/cgu.c
create mode 100644 drivers/clk/ingenic/cgu.h
create mode 100644 drivers/clk/ingenic/jz4740-cgu.c
create mode 100644 drivers/clk/ingenic/jz4780-cgu.c
create mode 100644 drivers/irqchip/irq-ingenic.c
create mode 100644 drivers/tty/serial/8250/8250_ingenic.c
create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
create mode 100644 include/dt-bindings/clock/jz4780-cgu.h
rename arch/mips/jz4740/irq.h => include/linux/irqchip/ingenic.h (74%)
--
2.3.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
