On Mon, Dec 16, 2024 at 02:25:13PM -0500, Frank Li wrote: > - Add binding doc > - Add imx91 thermal driver > - dts part wait for https://lore.kernel.org/imx/Z04W5chGq5TitB9f@lizhi-Precision-Tower-5810/ > merged, so not in this serial. > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> Rafael J. Wysocki and Daniel Lezcano Do you have chance to check this patches? Frank > --- > Changes in v4: > - Add Kryz's review tag for binding > - Add Marco's review tag for driver > - Use devm_add_action() > - Move pm_runtim_put before thermal_of_zone_register() > - Link to v3: https://lore.kernel.org/r/20241212-imx91tmu-v3-0-85e756b29437@xxxxxxx > > Changes in v3: > - add ref thermal-sensor > - restrict #thermal-sensor-cells to 0 only > - Change to unevaluatedProperties > > - add IMX91_TMU_ prefix for register define > - remove unused register define > - fix missed pm_runtime_put() at error path in imx91_tmu_get_temp() > - use dev variable in probe function > - use pm_runtime_set_active() in probe > - move START to imx91_tmu_get_temp() > - use DEFINE_RUNTIME_DEV_PM_OPS() > - keep set reset value because there are not sw "reset" bit in controller, > uboot may change and enable tmu. > > - Link to v2: https://lore.kernel.org/r/20241210-imx91tmu-v2-0-5032aad4d88e@xxxxxxx > > Changes in v2: > - use low case for hexvalue > - combine struct imx91_tmu and tmu_sensor > - simplify imx91_tmu_start() and imx91_tmu_enable() > - use s16 for imx91_tmu_get_temp(), which may negative value > - use reverse christmas tree style > - use run time pm > - use oneshot to sample temp > - register thermal zone after hardware init > - Link to v1: https://lore.kernel.org/r/20241209-imx91tmu-v1-0-7859c5387f31@xxxxxxx > > --- > Pengfei Li (2): > dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module > thermal: imx91: Add support for i.MX91 thermal monitoring unit > > .../devicetree/bindings/thermal/fsl,imx91-tmu.yaml | 67 ++++++ > drivers/thermal/Kconfig | 10 + > drivers/thermal/Makefile | 1 + > drivers/thermal/imx91_thermal.c | 263 +++++++++++++++++++++ > 4 files changed, 341 insertions(+) > --- > base-commit: d07c576946b2bc440d6d2073998023e8a0bd7568 > change-id: 20241209-imx91tmu-af2a7c042d8d > > Best regards, > --- > Frank Li <Frank.Li@xxxxxxx> >
