Re: [PATCH 2/2] arm64: renesas: add initial support for MYIR Remi Pi

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 22/01/2025 13:56, Julien Massot wrote:
> Add basic support for the MyIR Remi Pi (based on r9a07g044l2):
>  - UART
>  - i2c
>  - emmc
>  - USB host
>  - HDMI output
>  - Ethernet
> 
> Signed-off-by: Julien Massot <julien.massot@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/Makefile               |   1 +
>  .../arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts | 420 +++++++++++++++++++++
>  2 files changed, 421 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index 97228a3cb99c163d299b508ee7653aafea3d1a3a..0b69bcfa405b69c26e8072d9b62be98dc621f89a 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
>  dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
>  r9a07g044l2-smarc-cru-csi-ov5645-dtbs := r9a07g044l2-smarc.dtb r9a07g044l2-smarc-cru-csi-ov5645.dtbo
>  dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtb
> +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-remi-pi.dtb

Why not keeping the order? Or is there no order at all?

>  
>  dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
>  dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..e6e00afc5f5b2347f139ec4dc145fac6fd39e75d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts
> @@ -0,0 +1,420 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for the MYiR Remi Pi
> + *
> + * Copyright (C) 2022 MYiR Electronics Corp.
> + * Copyright (C) 2025 Collabora Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> +
> +#include "r9a07g044l2.dtsi"
> +
> +/ {
> +	model = "MYIR Tech Limited Remi Pi MYB-YG2LX-REMI";
> +	compatible = "myir,remi-pi", "renesas,r9a07g044l2", "renesas,r9a07g044";
> +
> +	aliases {
> +		ethernet0 = &eth0;
> +		ethernet1 = &eth1;
> +
> +		serial0 = &scif0;
> +		serial1 = &scif1;
> +		serial2 = &scif2;
> +		serial3 = &scif3;
> +
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +
> +		mmc0 = &sdhi0;
> +		mmc1 = &sdhi1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@48000000 {
> +		device_type = "memory";
> +		/* first 128MB is reserved for secure area. */
> +		reg = <0x0 0x48000000 0x0 0x38000000>;
> +	};
> +
> +	reg_5p0v: regulator-reg_5p0v {

No underscores in node names.

> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5.0V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +


...

> +
> +&eth0 {
> +	pinctrl-0 = <&eth0_pins>;
> +	pinctrl-names = "default";
> +	phy-handle = <&phy0>;
> +	phy-mode = "rgmii-id";
> +	status = "okay";
> +
> +	phy0: ethernet-phy@4 {
> +		compatible = "ethernet-phy-id0022.1640",
> +			     "ethernet-phy-ieee802.3-c22";
> +		reg = <4>;
> +		interrupts-extended = <&pinctrl RZG2L_GPIO(44, 2) IRQ_TYPE_LEVEL_LOW>;
> +		rxc-skew-psec = <2400>;
> +		txc-skew-psec = <2400>;
> +		rxdv-skew-psec = <0>;
> +		txdv-skew-psec = <0>;
> +		rxd0-skew-psec = <0>;
> +		rxd1-skew-psec = <0>;
> +		rxd2-skew-psec = <0>;
> +		rxd3-skew-psec = <0>;
> +		txd0-skew-psec = <0>;
> +		txd1-skew-psec = <0>;
> +		txd2-skew-psec = <0>;
> +		txd3-skew-psec = <0>;
> +	};
> +};
> +
> +&eth1 {
> +	pinctrl-0 = <&eth1_pins>;
> +	pinctrl-names = "default";
> +	phy-handle = <&phy1>;
> +	phy-mode = "rgmii-id";
> +	status = "okay";
> +
> +	phy1: ethernet-phy@6 {
> +		compatible = "ethernet-phy-id0022.1640",
> +			     "ethernet-phy-ieee802.3-c22";
> +		reg = <6>;
> +		interrupts-extended = <&pinctrl RZG2L_GPIO(43, 2) IRQ_TYPE_LEVEL_LOW>;
> +		rxc-skew-psec = <2400>;
> +		txc-skew-psec = <2400>;
> +		rxdv-skew-psec = <0>;
> +		txdv-skew-psec = <0>;
> +		rxd0-skew-psec = <0>;
> +		rxd1-skew-psec = <0>;
> +		rxd2-skew-psec = <0>;
> +		rxd3-skew-psec = <0>;
> +		txd0-skew-psec = <0>;
> +		txd1-skew-psec = <0>;
> +		txd2-skew-psec = <0>;
> +		txd3-skew-psec = <0>;


At least some properties above do not exist. You cannot use them.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Maybe you need to update your dtschema and yamllint. Don't rely on
distro packages for dtschema and be sure you are using the latest
released dtschema.


Best regards,
Krzysztof