From: Alison Chaiken <alison_chaiken@xxxxxxxxxx> Create an imx6qdl-sabreauto-weim-nor.dtsi file whose inclusion in a DTS file sets GPIO5 to the level at boot that the WEIM-NOR device requires. The GPIO is set via the gpio-hogging mechanism. Devices whose pinmux needs conflict with those of NOR are disabled. Signed-off-by: Alison Chaiken <alison_chaiken@xxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-sabreauto-weim-nor.dtsi | 43 +++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qdl-sabreauto-weim-nor.dtsi diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto-weim-nor.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto-weim-nor.dtsi new file mode 100644 index 0000000..a126335 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabreauto-weim-nor.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * Copyright (c) 2015 Mentor Graphics Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +&gpio5 { + weim_nor { + gpio-hog; + gpios = <4 0>; + output-low; + line-name = "weim-nor-gpio"; + }; +}; + +&weim { + status = "okay"; +}; + +/* Disable devices that have pinmux conflicts with WEIM */ + +&i2c3 { + status = "disabled"; +}; + +&uart3 { + status = "disabled"; +}; + +&ecspi1 { + status = "disabled"; +}; + +&usdhc3 { + status = "disabled"; +}; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
