Add r5fss and core0 nodes to the devicetree. This is the same as present
on am62p.
Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 0b1dd5390cd3f42b0ec56bab042388722b4c22a1..3555d8d8ad3c1999e772376758047f6f3500fb7a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -88,4 +88,29 @@ wkup_vtm0: temperature-sensor@b00000 {
power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
#thermal-sensor-cells = <1>;
};
+
+ wkup_r5fss0: r5fss@78000000 {
+ compatible = "ti,am62-r5fss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78000000 0x00 0x78000000 0x8000>,
+ <0x78100000 0x00 0x78100000 0x8000>;
+ power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ wkup_r5fss0_core0: r5f@78000000 {
+ compatible = "ti,am62-r5f";
+ reg = <0x78000000 0x00008000>,
+ <0x78100000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <121>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 121 1>;
+ firmware-name = "am62-wkup-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
};
--
2.47.1
