Hi,
On 23-04-15 18:36, Hans de Goede wrote:
Like on most non devel-boards it is still possible to get an uart on
the Utoo P66 tablet by soldering some wires to the right pads on the PCB,
add support for this to the dts, like we do with all sunxi boards.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
This one is no good, the uart cannot be used as it shares a pin with the
lcd-panel, self-NACK.
Regards,
Hans
---
arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 00bdf28..bb8d61a 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -57,6 +57,14 @@
model = "Utoo P66";
compatible = "utoo,p66", "allwinner,sun5i-a13";
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
i2c_lcd: i2c@0 {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
@@ -238,6 +246,12 @@
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
&usb_otg {
dr_mode = "otg";
status = "okay";
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
