From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same mode name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index 8ba3ec27bee07..7b2bad5f2f0ba 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -124,7 +124,7 @@ sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
- model = "imx-audio-tlv320aic32x4";
+ model = "tqm-tlv320aic32";
ssi-controller = <&ssi1>;
audio-codec = <&tlv320aic32x4>;
audio-asrc = <&asrc>;
--
2.34.1
