This patch adds ktd2692 Flash LED driver with LED Flash class Change in v7: - Add flash-max-microamp property for Flash LED - Change gpio-legacy interface to gpio consumer interface Change in v6 resend: - Adjust indent using checkpatch.pl script with strict option Change in v6: - Change goto label to if-else - Change DT binding style for LED device binding Change in v5: - Clean up the code - Fix help message of Kconfig - Fix issue related with regulator and mutex usage - Remove tab spaces in bindings Change in v4: - Clean up the code - Modify binding documentation of ktd2692 Change in v3: - Clean up the code - Add aux gpio pin to control Flash LED Change in v2: - Introduction of LED Flash class as Jacek's comment - Supplement of binding documentation - Rename gpio control pin and remove unused pin - Add regulator for the Flash LED Ingi Kim (3): of: Add vendor prefix for Kinetic technologies leds: ktd2692: add device tree bindings for ktd2692 leds: Add ktd2692 flash LED driver .../devicetree/bindings/leds/leds-ktd2692.txt | 47 +++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-ktd2692.c | 435 +++++++++++++++++++++ 5 files changed, 493 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt create mode 100644 drivers/leds/leds-ktd2692.c -- 2.0.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html