Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:
da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
index 4df10379ff22..173401c58d53 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
@@ -412,14 +412,14 @@ &gpio {
status = "okay";
/* Don't pull down battery voltage adc io channel */
- batt_volt_en {
+ batt-volt-en-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-high;
};
/* Don't impede Bluetooth clock signal */
- bt_clock_en {
+ bt-clock-en-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
input;
@@ -433,19 +433,19 @@ bt_clock_en {
* anything, but they are present in the source code from LEGO.
*/
- bt_pic_en {
+ bt-pic-en-hog {
gpio-hog;
gpios = <51 GPIO_ACTIVE_HIGH>;
output-low;
};
- bt_pic_rst {
+ bt-pic-rst-hog {
gpio-hog;
gpios = <78 GPIO_ACTIVE_HIGH>;
output-high;
};
- bt_pic_cts {
+ bt-pic-cts-hog {
gpio-hog;
gpios = <87 GPIO_ACTIVE_HIGH>;
input;
--
2.43.0
