[PATCH] ARM: dts: marvell: armada: Align GPIO hog name with bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:

  armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi | 8 ++++----
 arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index 8208c6a9627a..7aa71a9aa1bb 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -453,7 +453,7 @@ &gpio0 {
 	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
-	wifi-disable {
+	wifi-disable-hog {
 		gpio-hog;
 		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -465,7 +465,7 @@ &gpio1 {
 	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
-	lte-disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -476,14 +476,14 @@ lte-disable {
 	 * This signal, when asserted, isolates Armada 38x sample at reset pins
 	 * from control of external devices. Should be de-asserted after reset.
 	 */
-	sar-isolation {
+	sar-isolation-hog {
 		gpio-hog;
 		gpios = <15 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "sar-isolation";
 	};
 
-	poe-reset {
+	poe-reset-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
index f7daa3bc707e..cf32ba9b4e8e 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -34,7 +34,7 @@ &eth1 {
 };
 
 &gpio0 {
-	phy1_reset {
+	phy1-reset-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
-- 
2.43.0