> Mark Rutland <mark.rutland@xxxxxxx> hat am 7. April 2015 um 13:29 geschrieben: > > > On Sat, Apr 04, 2015 at 10:40:13PM +0100, Stefan Wahren wrote: > > Hi, > > Hi, > > > i'm currently working on drivers (regulator and power switch) for a power > > subsystem of a ARM9 processor (Freescale i.MX28). There are interrupts for > > the > > power subsystem which share the same interrupt line. This interrupt line is > > needed by both drivers (regulator and power switch). > > > > Now the question what is the right way (tm) to specify the interrupt in the > > devicetree and fetch the irq number during driver probe? > > If the interrupts are generated by the subsystem as a whole, then A > would be more correct. If you can read some shared register to determine > the particular sub-block which generated the interrupt, A would > certainly be the right way of describing the HW. Just for the records. I asked this question in the Freescale Community and a Freescale employee reported that the interrupts are generated by the subsystem as a whole and there is no logical grouping. Thanks Stefan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
