在 2025/1/15 18:36, Jiebing Chen 写道:
在 2025/1/15 16:36, Jerome Brunet 写道:
[ EXTERNAL EMAIL ]
On Wed 15 Jan 2025 at 10:56, Jiebing Chen <jiebing.chen@xxxxxxxxxxx>
wrote:
在 2025/1/14 22:05, Jerome Brunet 写道:
[ EXTERNAL EMAIL ]
On Tue 14 Jan 2025 at 19:20, Jiebing Chen
<jiebing.chen@xxxxxxxxxxx> wrote:
+
+MODULE_DESCRIPTION("Amlogic to codec driver");
+MODULE_AUTHOR("jiebing.chen@xxxxxxxxxxx");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
index
571f65788c592050abdca264f5656d4d1a9d99f6..2db1cd18cf2cea507f3d7282054e03d953586648
100644
--- a/sound/soc/meson/t9015.c
+++ b/sound/soc/meson/t9015.c
@@ -89,10 +89,7 @@ static struct snd_soc_dai_driver t9015_dai = {
.channels_min = 1,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
- .formats = (SNDRV_PCM_FMTBIT_S8 |
- SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S20_LE |
- SNDRV_PCM_FMTBIT_S24_LE),
+ .formats = (SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S32_LE),
Again, mixed up changes with zero justification.
This drops S8 and S16 format support for the existing SoCs (such
as GXL)
which is known to work and add S32 support on an HW documented
as 24bits
only. Can you explain ?
for g12a, sm1 etc, it is use new audio ip, GXL is old ip,
If there are chips difference we did not know about, then you should
introduce those difference, without breaking existing support -
including for GXL, which is what you did IIUC.
the new ip not support 24 bit,
Are sure about that ? that code has been there for a while.
If sm1 does not support SNDRV_PCM_FMTBIT_S24_LE, you should a fix
up patch for
that, with the proper "Fixes:" tag, how to reproduce the problem and
explaining the fix.
maybe there are some gap , we support SNDRV_PCM_FMTBIT_S24, not
support the
SNDRV_PCM_FMTBIT_S24_3LE, for SNDRV_PCM_FMTBIT_S24
it is Signed, 24-bit (32-bit in memory), little endian , the audio dma
busrt is 64bit
It makes absolutely no sense to discuss memory layout for the codec.
it can get the full data. we send the 32 bit data mclk = 32bit* 48k
*4,
use the clk to send
the SNDRV_PCM_FMTBIT_S24, the hadware always send the 32bit data
No it does not. It send 24 bits of data over a 32 bits physical word
with
8 bits ignored.
The original intention, we play 32bit data from tdmout, it play error,
so we add the s32_le
for tdmouta ,it can bind Multiple codec, one codec is the internal codec,
other is external codec, tdmout can send the data to internal codec
and external codec from the output pad
for example, tdmout send 4 ch, 2 ch is send the internal codec, 2 ch
send the data pad
it aplay error, due to the internal codec fomat parameter limiting
condition
There is a contradiction here, Considering our internal codec can
process this it, drop 8bit, 24bit valid
therefore software can set s24_le/s32_le, still work ok for hardware,
so Multiple ch can support for internal codec and external codec
add the s32_le format for the t9015.c, it can resovle Multiple codec
s32_le format case, although hardware only process 24bit of 32bit, but
it can't affect the acodec hardware work, it still work fine
usually we add the s32_le format support, if not allow to do it, think
of it as a limitation, we can remove 32bit test for it
so, i think we only add the SNDRV_PCM_FMTBIT_S32 base on it
That's wrong if the codec does not actually use the full 32bits ... and
I have clear indication that's what the codec is doing, on GXL at least.
we think the 24 bit is the SNDRV_PCM_FMTBIT_S24_3LE, it is 24bit in
memroy,
due to the dma busrt 64 bit limit, it can't align the sample bit, if
it is
24 bit
Again, memory layout makes no sense here.
so the clock configure can't 24bit clock,
I disagree and this has been tested. If you have a test case showing
otherwise please share it.
by the way, We discuss internally for gxl,
it also support the SNDRV_PCM_FMTBIT_S32
Does it really ? If it is just to ignore the 8bits LSB, that not a
support.
usually support 16/32 bit for new audio ip , for
SNDRV_PCM_FMTBIT_S24_LE,
it width =24, phy =32
Yes physical of SNDRV_PCM_FMTBIT_S24_LE, so most chip supporting 32
bits
width would support this S24_LE, unless there is something odd.
it was treated as 32 bit to send for tdm, so we can only add the
S32LE
base on it , right ?
You are asking me ? How am I suppose to know ?
but if the gxl not support the 32bit
I don't see a problem with a DAC taking input on 32bits physical
interface and ignoring some bit on processing.
If that's not the case, please send a proper fix change with some
explanation
we need add new snd_soc_dai_driver t9015_dai_s4 ?
If I understood correctly format depends on the chip and needs to
adjusted including for sm1.
},
.ops = &t9015_dai_ops,
};
-- Jerome
--
Jerome
--
Jerome
