Regards,
Igal Liberman.
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Tuesday, April 21, 2015 3:52 AM
> To: Liberman Igal-B31950
> Cc: devicetree@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx; Tang
> Yuantian-B29983
> Subject: Re: [v3] dt/bindings: qoriq-clock: Add binding for FMan clock mux
>
> On Mon, 2015-04-20 at 06:40 -0500, Liberman Igal-B31950 wrote:
> >
> >
> > Regards,
> > Igal Liberman.
> >
> > > -----Original Message-----
> > > From: Liberman Igal-B31950
> > > Sent: Monday, April 20, 2015 2:07 PM
> > > To: Wood Scott-B07421
> > > Cc: devicetree@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> > > Subject: RE: [v3] dt/bindings: qoriq-clock: Add binding for FMan
> > > clock mux
> > >
> > >
> > >
> > > Regards,
> > > Igal Liberman.
> > >
> > > > -----Original Message-----
> > > > From: Wood Scott-B07421
> > > > Sent: Friday, April 17, 2015 8:41 AM
> > > > To: Liberman Igal-B31950
> > > > Cc: devicetree@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> > > > Subject: Re: [v3] dt/bindings: qoriq-clock: Add binding for FMan
> > > > clock mux
> > > >
> > > > On Thu, 2015-04-16 at 01:11 -0500, Liberman Igal-B31950 wrote:
> > > > >
> > > > >
> > > > > Regards,
> > > > > Igal Liberman.
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Wood Scott-B07421
> > > > > > Sent: Wednesday, April 15, 2015 8:36 PM
> > > > > > To: Liberman Igal-B31950
> > > > > > Cc: devicetree@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx
> > > > > > Subject: Re: [v3] dt/bindings: qoriq-clock: Add binding for
> > > > > > FMan clock mux
> > > > > >
> > > > > > On Tue, 2015-04-14 at 13:56 +0300, Igal.Liberman wrote:
> > > > > > > From: Igal Liberman <Igal.Liberman@xxxxxxxxxxxxx>
> > > > > > >
> > > > > > > v3: Addressed feedback from Scott:
> > > > > > > - Removed clock specifier description.
> > > > > > >
> > > > > > > v2: Addressed feedback from Scott:
> > > > > > > - Moved the "fman-clk-mux" clock provider details
> > > > > > > under "clocks" property.
> > > > > > >
> > > > > > > Signed-off-by: Igal Liberman <Igal.Liberman@xxxxxxxxxxxxx>
> > > > > > > ---
> > > > > > > .../devicetree/bindings/clock/qoriq-clock.txt | 17
> > > > +++++++++++++++--
> > > > > > > 1 file changed, 15 insertions(+), 2 deletions(-)
> > > > > > >
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > > > > > > b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > > > > > > index b0d7b73..2bb3b38 100644
> > > > > > > ---
> > > > > > > a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > > > > > > +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.tx
> > > > > > > +++ t
> > > > > > > @@ -65,9 +65,10 @@ Required properties:
> > > > > > > It takes parent's clock-frequency as its clock.
> > > > > > > * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
> > > > > > > * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock
> > > > > > > (v2.0)
> > > > > > > + * "fsl,fman-clk-mux" for the Frame Manager clock.
> > > > > > > - #clock-cells: From common clock binding. The number of cells in
> a
> > > > > > > - clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
> > > > > > > - clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
> > > > > > > + clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
> > > and
> > > > > > > + "fsl,fman-clk-mux" clocks or <1> for "fsl,qoriq-core-pll-
> > > [1,2].0".
> > > > > > > For "fsl,qoriq-core-pll-1.0" clocks, the single
> > > > > > > clock-specifier cell may take the following values:
> > > > > > > * 0 - equal to the PLL frequency @@ -145,6 +146,18 @@
> > > Example
> > > > > > > for clock block and clock provider:
> > > > > > > clocks = <&sysclk>;
> > > > > > > clock-output-names = "platform-pll",
> > > "platform-pll-
> > > > > > div2";
> > > > > > > };
> > > > > > > +
> > > > > > > + fm0clk: fm0-clk-mux {
> > > > > > > + #clock-cells = <0>;
> > > > > > > + reg = <0x10 4>
> > > > > > > + compatible = "fsl,fman-clk-mux";
> > > > > > > + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
> > > <&pll0 3>,
> > > > > > > + <&platform_pll 0>, <&pll1 1>, <&pll1
> > > 2>;
> > > > > > > + clock-names = "pll0", "pll0-div2", "pll0-div3",
> > > > > > > + "pll0-div4", "platform-pll", "pll1-
> > > div2",
> > > > > > > + "pll1-div3";
> > > > > > > + clock-output-names = "fm0-clk";
> > > > > > > + };
> > > > > > > };
> > > > > > > };
> > > > > > >
> > > > > >
> > > > > > I don't see this register in the manuals for older DPAA chips,
> > > > > > such as
> > > > > > p4080 or p3041. Is it present but undocumented? Should I be
> > > > > > looking somewhere other than "Clocking Memory Map"?
> > > > > >
> > > > >
> > > > > It's available only in part of the new chips (T4, T2, B4).
> > > > > In T1024/T1040 there's only one option for FMan clock so this
> > > > > register is not
> > > > available.
> > > >
> > > > So it's part of the 2.0 chassis? I'd stick a 2.0 in there, then.
> > > > Who knows what we may see in the future.
> > > >
> > >
> > > OK,
> > > We can go with "fsl,fman-clk-mux-1/2-0.".
> > > In that case, we need to update FMan nodes and the clock driver:
> > > https://patchwork.ozlabs.org/patch/443973/
> > > https://patchwork.ozlabs.org/patch/461813/
> > > I will update those patches separately.
> > >
> >
> > Scott,
> > There are 2 options:
> > Use "fsl,fman-clk-mux-1.0" for SoC without CLKCGnHWACSR register.
> > Use "fsl,fman-clk-mux-2.0" for SoC with CLKCGnHWACSR register.
> > Or
> > Use "fsl,fman-clk-mux-1.0" for SoC which support FMan V2 (Pxxxx) Use
> > "fsl,fman-clk-mux-2.0" for SoC which support FMan V3 (B/T)
>
> 1.0/2.0 in the clockgen node refers to chassis version. It has nothing to do
> with FMan version.
>
I know. However there's a match: 1.0 chassis used in SoC with FMan v2 and 2.0 chassis in SoC with FMan v3.
> In fact, fman should not be in the compatible because, now that I found the
> documentation for this, I see that it's more generic than that.
> "fman-clk-mux" should be replaced with "qoriq-hwacsr".
>
> > Using the 1st option might be confusing because core pll/mux 2.0
> represents B/T devices and 1.0 represent Pxxxx.
> > In this case, T1040 uses "fsl,qoriq-core-pll/mux-2.0" and "fsl,fman-clk-mux-
> 1.0".
> > On the other hand, the second option doesn't distinguishes between T4
> and T1 (for example), as T1 doesn't have reg property while T4 has.
>
> How would t1040 have a so-called "fman-clk-mux" node at all if it doesn't
> have this register?
>
> I think we've made a mess of the clock bindings and this is only going to make
> it worse. We need to stay compatible with the mess we've made, but I'm
> inclined to say that we shouldn't add more nodes to it.
>
> Instead, have the toplevel clockgen node have a chip-based compatible in
> addition to version (e.g. compatible = "fsl,t4240-clockgen",
> "fsl,qoriq-clockgen-2.0") and have the toplevel node export whatever clocks
> are needed. Put the logic to deal with all the different dividers, register
> values, and such in code, not the device tree. The binding should be focused
> on how to encode the specifier of the exported clocks.
>
We have 2 cases:
- Devices (T2/T4/B4) with CLKCG1HWACSR register.
- Devices (Pxxxx, T1) without CLKCG1HWACSR register (Pxxxx devices have many options, T1 has only one option)
For the first group, we can have " qoriq-hwacsr" property in the clock node.
Currently T4 FMan clock mux node is the following:
fm1clk: fm1-clk-mux {
#clock-cells = <0>;
compatible = "fsl,fman-clk-mux";
clocks = <&pll1 1>, <&pll1 2>, <&pll1 3>,
<&platform_pll 0>, <&pll0 1>, <&pll0 2>;
clock-names = "pll1-div2", "pll1-div3", "pll1-div4",
"platform-pll", "pll0-div2", "pll0-div3";
clock-output-names = "fm1-clk";
};
As far as I understand we need to move the node to the top level clock node.
In addition we need to add reg property and change the name of the node and the compatible.
In that case, the driver can read this register instead of parsing the RCW.
What about the devices of the second group?
In this case we don't have a register to determine the source clock. So we need access to guts registers, like we have currently.
The suggestion above doesn’t suit for those devices.
> -Scott
>
Igal
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
