Hello,
Please review the patch set.
V4:
---
- Removed "Add RGMII support" patch as it needs some work from the
driver side.
- Improved IPBM device documentation.
- There is a new warning in CHECK_DTBS which are false positive so
ignored them.
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+'
V3:
---
- Fixed dt_binding_check warnings in ipmb-dev.yaml
- Updated title and description in ipmb-dev.yaml file.
- Updated i2c-protocol description in ipmb-dev.yaml file.
V2:
---
Fixed CHECK_DTBS errors by
- Using generic node names
- Documenting phy-mode rgmii-rxid in ftgmac100.yaml
- Adding binding documentation for IPMB device interface
NINAD PALSULE (6):
ARM: dts: aspeed: system1: Add IPMB device
ARM: dts: aspeed: system1: Add GPIO line name
ARM: dts: aspeed: system1: Reduce sgpio speed
ARM: dts: aspeed: system1: Update LED gpio name
ARM: dts: aspeed: system1: Remove VRs max8952
ARM: dts: aspeed: system1: Mark GPIO line high/low
Ninad Palsule (3):
dt-bindings: net: faraday,ftgmac100: Add phys mode
bindings: ipmi: Add binding for IPMB device intf
ARM: dts: aspeed: system1: Disable gpio pull down
.../devicetree/bindings/ipmi/ipmb-dev.yaml | 55 +++++++
.../bindings/net/faraday,ftgmac100.yaml | 3 +
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 139 +++++++++++-------
3 files changed, 143 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
--
2.43.0
