Re: [PATCH 1/3] ARM: at91/dt: sama5d3 fill in mmc1 and default disabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Mar 26, 2015 at 05:38:23PM +0000, Ben Dooks wrote:
> The mmc1 channel is not populated on the SAM5D3 Xplained board, however
> it is enabled and therefore the driver is attaching to it.
> 
> The node configuration for mmc1 is missing, so add an mmc1 node in the
> device tree so add the basic node, set it to default it to disabled. Also
> add the vmmc and also the necessary slot configuration if this node
> where to be enabled to avoid the following warnings from the driver.
> 
> atmel_mci f8000000.mmc: No vmmc regulator found
> atmel_mci f8000000.mmc: No vqmmc regulator found
> 
> Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>

Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>

> --
> CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> CC: Andrew Victor <linux@xxxxxxxxxxxx>
> CC: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> CC: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx>
> CC: Rob Herring <robh+dt@xxxxxxxxxx>
> CC: Pawel Moll <pawel.moll@xxxxxxx>
> CC: Mark Rutland <mark.rutland@xxxxxxx>
> CC: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> CC: Kumar Gala <galak@xxxxxxxxxxxxxx>
> CC: Russell King <linux@xxxxxxxxxxxxxxxx>
> CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> CC: devicetree@xxxxxxxxxxxxxxx
> ---
>  arch/arm/boot/dts/at91-sama5d3_xplained.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index fec1fca..652c4dd 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -43,6 +43,17 @@
>  				};
>  			};
>  
> +			mmc1: mmc@f8000000 {
> +				vmmc-supply = <&vcc_3v3_reg>;
> +				vqmmc-supply = <&vcc_3v3_reg>;
> +				status = "disabled";
> +				slot@0 {
> +					reg = <0>;
> +					bus-width = <4>;
> +					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
> +				};
> +			};
> +
>  			spi0: spi@f0004000 {
>  				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
>  				status = "okay";
> -- 
> 2.1.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux