Re: [PATCH v4 0/2] Add Devicetree support for USB controllers on QCS8300

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 14 Nov 2024 11:21:50 +0530, Krishna Kurapati wrote:
> This series aims at enabling USB on QCS8300 which has 2 USB controllers.
> The primary controller is SuperSpeed capable and secondary one is
> High Speed only capable. Both the High Speed Phys are Femto phys and the
> SuperSpeed Phy is a QMP Uni Phy.
> 
> Base DT Support has been added for both controllers while only one has
> been enabled on Ride Platform. The primary controller has been configured
> in device mode. The secondary controller will be enabled in host mode post
> addition of SPMI Node which allows control over PMIC Gpios for providing
> vbus to connected peripherals.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
      commit: ceb39e1ea327a96cdd9fcc54c65664f0659cd9b7
[2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
      commit: 46ee6177b76736b49b1f34bec1244e4996fd199c

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux