On Tue, Apr 14, 2015 at 10:39:11PM -0700, Nicolin Chen wrote:
> The SDMA on imx6sx has a few DMA event remapping configurations
> inside the GPR (General Purpose Register) of that SoC. When users
> want to use a non-default DMA event, they need to configure the
> GPR register. So this patch gives an interface of the GPR and
> implements it in the SDMA driver so as to finish the DMA event
> remapping.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
> ---
> .../devicetree/bindings/dma/fsl-imx-sdma.txt | 9 ++++
> drivers/dma/imx-sdma.c | 58 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> index dc8d3aa..03315a6 100644
> --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> @@ -8,6 +8,7 @@ Required properties:
> "fsl,imx51-sdma"
> "fsl,imx53-sdma"
> "fsl,imx6q-sdma"
> + "fsl,imx6sx-sdma"
> The -to variants should be preferred since they allow to determine the
> correct ROM script addresses needed for the driver to work without additional
> firmware.
> @@ -19,6 +20,14 @@ Required properties:
> - fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
> scripts firmware
>
> +Optional properties:
> +- fsl, sdma-event-remap : List of one or more DMA event remapping
> + configurations. Its format: <&gpr addr shift val>
> + gpr : the gpr phandle
> + addr : the register address of the GPR
> + shift : the bit shift of the GPR register
> + val : the value of that bit
This binding allows arbitrary register writes to the GPR register space.
I don't think we want to allow that. A binding for this if necessary at
all must be higher level.
> +static int sdma_event_remap(struct sdma_engine *sdma)
> +{
> + struct device_node *np = sdma->dev->of_node;
> + char propname[] = "fsl,sdma-event-remap";
> + struct of_phandle_args gpr_spec;
> + struct regmap *gpr;
> + int i = 0, ret = 0;
> +
> + /* Only support DT */
> + if (IS_ERR(np))
> + return ret;
> +
> + /* Only apply to imx6sx platform */
> + if (!of_device_is_compatible(np, "fsl,imx6sx-sdma"))
> + return ret;
We already have struct sdma_driver_data. Please add a have_remap field
or similar there.
> +
> + /* Bypass if no need to remap */
> + if (!of_find_property(np, propname, NULL))
> + return ret;
> +
> + /* Fetch the remap configurations of GPR */
> + ret = of_parse_phandle_with_args(np, propname, "#gpr-cells", i++,
> + &gpr_spec);
> + if (ret) {
> + dev_err(sdma->dev, "failed to get a correct %s property: %d\n",
> + propname, ret);
> + return ret;
> + }
> +
> +next:
> + gpr = syscon_node_to_regmap(gpr_spec.np);
> + if (IS_ERR(gpr)) {
> + ret = PTR_ERR(gpr);
> + dev_err(sdma->dev, "failed to get gpr regmap: %d\n", reg);
> + return ret;
> + }
> +
> + /* 0 : Register address, 1 : Bit shift, 2 : Bit value */
> + regmap_update_bits(gpr, gpr_spec.args[0], BIT(gpr_spec.args[1]),
> + gpr_spec.args[2] << gpr_spec.args[1]);
> +
> + if (!of_parse_phandle_with_args(np, propname, "#gpr-cells", i++,
> + &gpr_spec))
> + goto next;
C has native support for loops. Please use it.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
