Il 06/01/25 10:19, Jianjun Wang (王建军) ha scritto:
On Fri, 2025-01-03 at 10:26 +0100, AngeloGioacchino Del Regno wrote:
External email : Please do not click links or open attachments until
you have verified the sender or the content.
Il 03/01/25 07:00, Jianjun Wang ha scritto:
Add compatible string and clock definition for MT8196. It has 6
clocks like
the MT8195, but 2 of them are different.
Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
---
.../bindings/pci/mediatek-pcie-gen3.yaml | 29
+++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-
gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-
gen3.yaml
index f05aab2b1add..b4158a666fb6 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -51,6 +51,7 @@ properties:
- mediatek,mt7986-pcie
- mediatek,mt8188-pcie
- mediatek,mt8195-pcie
+ - mediatek,mt8196-pcie
- const: mediatek,mt8192-pcie
- const: mediatek,mt8192-pcie
- const: airoha,en7581-pcie
@@ -197,6 +198,34 @@ allOf:
minItems: 1
maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt8196-pcie
+ then:
+ properties:
+ clocks:
+ minItems: 6
+
+ clock-names:
+ items:
+ - const: pl_250m
+ - const: tl_26m
+ - const: peri_26m
+ - const: peri_mem
+ - const: ahb_apb
ahb_apb is a bus clock, so you can set it as
- const: bus
Agree, I'll change it to "bus" in the next version, thanks.
+ - const: low_power
Can you please clarify what the LP clock is for?
This is a power-saving clock. Its clock source consumes less power than
a regular clock, we need to keep this clock on if when entering L1.2
during suspend.
In the driver, you are keeping all clocks ON instead.
Is this clock required to be ON when the full power ones are enabled and
the SoC is not in suspend state?
Can you please add handling for this "special" clock so that we can save power
during suspend?
Cheers,
Angelo
Thanks.
Thanks,
Angelo
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
- if:
properties:
compatible:
