DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/net/amlogic,meson-dwmac.yaml | 14 +--
.../devicetree/bindings/net/asix,ax88178.yaml | 4 +-
.../bindings/net/brcm,bcmgenet.yaml | 32 +++----
.../bindings/net/brcm,mdio-mux-iproc.yaml | 46 ++++-----
.../bindings/net/can/bosch,c_can.yaml | 10 +-
.../bindings/net/can/microchip,mcp2510.yaml | 18 ++--
.../devicetree/bindings/net/stm32-dwmac.yaml | 94 +++++++++----------
.../bindings/net/ti,davinci-mdio.yaml | 10 +-
.../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 20 ++--
.../bindings/net/ti,k3-am654-cpts.yaml | 36 +++----
.../bindings/net/wireless/marvell,sd8787.yaml | 17 ++--
11 files changed, 150 insertions(+), 151 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index d1e2bca3c503..798a4c19f18c 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -166,11 +166,11 @@ unevaluatedProperties: false
examples:
- |
ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
- interrupts = <8>;
- interrupt-names = "macirq";
- clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
- clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
- phy-mode = "rgmii";
+ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
+ interrupts = <8>;
+ interrupt-names = "macirq";
+ clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+ phy-mode = "rgmii";
};
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
index 768504ccbf74..03341b7438d5 100644
--- a/Documentation/devicetree/bindings/net/asix,ax88178.yaml
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -63,8 +63,8 @@ examples:
#size-cells = <0>;
ethernet@1 {
- compatible = "usbb95,772b";
- reg = <1>;
+ compatible = "usbb95,772b";
+ reg = <1>;
};
};
};
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 7c90a4390531..0e3fb4e42e3f 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -85,16 +85,16 @@ examples:
#size-cells = <1>;
mdio0: mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xe14 0x8>;
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
- phy1: ethernet-phy@1 {
+ phy1: ethernet-phy@1 {
max-speed = <1000>;
reg = <1>;
compatible = "ethernet-phy-ieee802.3-c22";
- };
+ };
};
};
@@ -110,10 +110,10 @@ examples:
interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
mdio1: mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xe14 0x8>;
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
};
};
@@ -129,15 +129,15 @@ examples:
interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
mdio2: mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xe14 0x8>;
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 {
max-speed = <1000>;
reg = <0>;
compatible = "ethernet-phy-ieee802.3-c22";
- };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
index af96b4fd89d5..3f27746d9a56 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -38,43 +38,43 @@ unevaluatedProperties: false
examples:
- |
- mdio_mux_iproc: mdio-mux@66020000 {
+ mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 {
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- pci_phy0: pci-phy@0 {
- compatible = "brcm,ns2-pcie-phy";
- reg = <0x0>;
- #phy-cells = <0>;
- };
+ pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ };
};
mdio@7 {
- reg = <0x7>;
- #address-cells = <1>;
- #size-cells = <0>;
+ reg = <0x7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- pci_phy1: pci-phy@0 {
- compatible = "brcm,ns2-pcie-phy";
- reg = <0x0>;
- #phy-cells = <0>;
- };
+ pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ };
};
mdio@10 {
- reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gphy0: eth-phy@10 {
- reg = <0x10>;
- };
+ eth-phy@10 {
+ reg = <0x10>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 4d7d67ee175a..ff1b59a0294e 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -99,11 +99,11 @@ examples:
#include <dt-bindings/reset/altr,rst-mgr.h>
can@ffc00000 {
- compatible = "bosch,d_can";
- reg = <0xffc00000 0x1000>;
- interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
- clocks = <&can0_clk>;
- resets = <&rst CAN0_RESET>;
+ compatible = "bosch,d_can";
+ reg = <0xffc00000 0x1000>;
+ interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+ clocks = <&can0_clk>;
+ resets = <&rst CAN0_RESET>;
};
- |
can@0 {
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
index db446dde6842..e0ec53bc10c6 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
@@ -56,15 +56,15 @@ examples:
#size-cells = <0>;
can@1 {
- compatible = "microchip,mcp2515";
- reg = <1>;
- clocks = <&clk24m>;
- interrupt-parent = <&gpio4>;
- interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <®5v0>;
- xceiver-supply = <®5v0>;
- gpio-controller;
- #gpio-cells = <2>;
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk24m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <®5v0>;
+ xceiver-supply = <®5v0>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index bf23838fe6e8..85cea9966a27 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -154,56 +154,56 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
//Example 1
- ethernet0: ethernet@5800a000 {
- compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
- reg = <0x5800a000 0x2000>;
- reg-names = "stmmaceth";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clock-names = "stmmaceth",
- "mac-clk-tx",
- "mac-clk-rx",
- "ethstp",
- "eth-ck";
- clocks = <&rcc ETHMAC>,
- <&rcc ETHTX>,
- <&rcc ETHRX>,
- <&rcc ETHSTP>,
- <&rcc ETHCK_K>;
- st,syscon = <&syscfg 0x4>;
- snps,pbl = <2>;
- snps,axi-config = <&stmmac_axi_config_0>;
- snps,tso;
- phy-mode = "rgmii";
- };
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc ETHCK_K>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ phy-mode = "rgmii";
+ };
- |
//Example 2 (MCU example)
- ethernet1: ethernet@40028000 {
- compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
- reg = <0x40028000 0x8000>;
- reg-names = "stmmaceth";
- interrupts = <0 61 0>, <0 62 0>;
- interrupt-names = "macirq", "eth_wake_irq";
- clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
- st,syscon = <&syscfg 0x4>;
- snps,pbl = <8>;
- snps,mixed-burst;
- phy-mode = "mii";
- };
+ ethernet1: ethernet@40028000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <0 61 0>, <0 62 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ snps,mixed-burst;
+ phy-mode = "mii";
+ };
- |
//Example 3
- ethernet2: ethernet@40027000 {
- compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
- reg = <0x40028000 0x8000>;
- reg-names = "stmmaceth";
- interrupts = <61>;
- interrupt-names = "macirq";
- clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
- st,syscon = <&syscfg 0x4>;
- snps,pbl = <8>;
- phy-mode = "mii";
- };
+ ethernet2: ethernet@40027000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <61>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ phy-mode = "mii";
+ };
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 53604fab0b73..08119b6880ee 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -72,9 +72,9 @@ unevaluatedProperties: false
examples:
- |
davinci_mdio: mdio@4a101000 {
- compatible = "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x4a101000 0x1000>;
- bus_freq = <1000000>;
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a101000 0x1000>;
+ bus_freq = <1000000>;
};
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 02b6d32003cc..b11894fbaec4 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -302,16 +302,16 @@ examples:
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
- };
- cpts@3d000 {
- compatible = "ti,am65-cpts";
- reg = <0x0 0x3d000 0x0 0x400>;
- clocks = <&k3_clks 18 2>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
+ cpts@3d000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x3d000 0x0 0x400>;
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 3888692275ad..3572749147fb 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -131,23 +131,23 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
cpts@310d0000 {
- compatible = "ti,am65-cpts";
- reg = <0x310d0000 0x400>;
- reg-names = "cpts";
- clocks = <&main_cpts_mux>;
- clock-names = "cpts";
- interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-periodic-outputs = <6>;
- ti,cpts-ext-ts-inputs = <8>;
+ compatible = "ti,am65-cpts";
+ reg = <0x310d0000 0x400>;
+ reg-names = "cpts";
+ clocks = <&main_cpts_mux>;
+ clock-names = "cpts";
+ interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-periodic-outputs = <6>;
+ ti,cpts-ext-ts-inputs = <8>;
- main_cpts_mux: refclk-mux {
- #clock-cells = <0>;
- clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
- <&k3_clks 157 91>, <&k3_clks 157 77>,
- <&k3_clks 157 102>, <&k3_clks 157 80>,
- <&k3_clks 120 3>, <&k3_clks 121 3>;
- assigned-clocks = <&main_cpts_mux>;
- assigned-clock-parents = <&k3_clks 118 11>;
- };
+ main_cpts_mux: refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+ <&k3_clks 157 91>, <&k3_clks 157 77>,
+ <&k3_clks 157 102>, <&k3_clks 157 80>,
+ <&k3_clks 120 3>, <&k3_clks 121 3>;
+ assigned-clocks = <&main_cpts_mux>;
+ assigned-clock-parents = <&k3_clks 118 11>;
+ };
};
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
index 1715b22e0dcf..930b700b73d0 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
@@ -79,15 +79,14 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
mmc {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- wifi@1 {
- compatible = "marvell,sd8897";
- reg = <1>;
- interrupt-parent = <&pio>;
- interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
- marvell,wakeup-pin = <3>;
+ wifi@1 {
+ compatible = "marvell,sd8897";
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ marvell,wakeup-pin = <3>;
};
};
-
--
2.43.0
