On 07.01.2025 10:53:26, Markus Schneider-Pargmann wrote: > On Wed, Dec 25, 2024 at 08:50:17PM +0100, Marc Kleine-Budde wrote: > > On 19.12.2024 20:57:52, Markus Schneider-Pargmann wrote: > > > m_can can be a wakeup source on some devices. Especially on some of the > > > am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup > > > the SoC. > > > > > > The wakeup-source property defines on which devices m_can can be used > > > for wakeup and in which power states. > > > > > > The pins associated with m_can have to have a special configuration to > > > be able to wakeup the SoC. This configuration is described in the wakeup > > > pinctrl state while the default state describes the default > > > configuration. > > > > > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > > > > The DTBS check fails: > > > > | $ make CHECK_DTBS=y ti/k3-am625-beagleplay.dtb > > | DTC [C] arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb > > | arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e08000: wakeup-source: 'oneOf' conditional failed, one must be fixed: > > | ['suspend', 'poweroff'] is not of type 'boolean' > > | ['suspend', 'poweroff'] is too long > > | from schema $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# > > | arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e08000: wakeup-source: ['suspend', 'poweroff'] is not of type 'boolean' > > | from schema $id: http://devicetree.org/schemas/wakeup-source.yaml# > > | arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e18000: wakeup-source: 'oneOf' conditional failed, one must be fixed: > > | ['suspend', 'poweroff'] is not of type 'boolean' > > | ['suspend', 'poweroff'] is too long > > | from schema $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# > > | arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e18000: wakeup-source: ['suspend', 'poweroff'] is not of type 'boolean' > > | from schema $id: http://devicetree.org/schemas/wakeup-source.yaml# > > Thanks, the bot also notified me about this issue. I wasn't able to > solve it without updating the dt-schema, so I submitted a pull request > there: > > https://github.com/devicetree-org/dt-schema/pull/150 I see, please add to the patch description that it depends on the that PR and re-post once it is accepted. Thanks, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Attachment:
signature.asc
Description: PGP signature
