There is no reason to define address/size-cells without defining child nodes in zynq-7000.dtsi. Define it in board file instead. Signed-off-by: Michal Simek <michal.simek@xxxxxxx> --- Changes in v2: - Update also zynq-ebaz4205.dts - Update commit message - Send it separately v1 https://lore.kernel.org/all/37057526d8ee14416f61fb6e2b82bed65bde5d3c.1733920873.git.michal.simek@xxxxxxx/ arch/arm/boot/dts/xilinx/zynq-7000.dtsi | 2 -- arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi index 4a29216a6d64..153b8d93cbee 100644 --- a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi +++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi @@ -303,8 +303,6 @@ nfc0: nand-controller@0,0 { compatible = "arm,pl353-nand-r2p1"; reg = <0 0 0x1000000>; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; nor0: flash@1,0 { status = "disabled"; diff --git a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts index 53fa6dbfd8fd..14f644156a6f 100644 --- a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts +++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts @@ -51,6 +51,8 @@ &gpio0 { &nfc0 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; nand@0 { reg = <0>; }; -- 2.43.0
