On Thu, Dec 19, 2024 at 10:34:50AM +0800, Chen Wang wrote: > hello ~ > > On 2024/12/11 1:33, Bjorn Helgaas wrote: > > On Mon, Dec 09, 2024 at 03:19:38PM +0800, Chen Wang wrote: > > > Add binding for Sophgo SG2042 PCIe host controller. > > > + sophgo,pcie-port: > [......] > > > + The Cadence IP has two modes of operation, selected by a strap pin. > > > + > > > + In the single-link mode, the Cadence PCIe core instance associated > > > + with Link0 is connected to all the lanes and the Cadence PCIe core > > > + instance associated with Link1 is inactive. > > > + > > > + In the dual-link mode, the Cadence PCIe core instance associated > > > + with Link0 is connected to the lower half of the lanes and the > > > + Cadence PCIe core instance associated with Link1 is connected to > > > + the upper half of the lanes. > > I assume this means there are two separate Root Ports, one for Link0 > > and a second for Link1? > > > > > + SG2042 contains 2 Cadence IPs and configures the Cores as below: > > > + > > > + +-- Core(Link0) <---> pcie_rc0 +-----------------+ > > > + | | | > > > + Cadence IP 1 --+ | cdns_pcie0_ctrl | > > > + | | | > > > + +-- Core(Link1) <---> disabled +-----------------+ > > > + > > > + +-- Core(Link0) <---> pcie_rc1 +-----------------+ > > > + | | | > > > + Cadence IP 2 --+ | cdns_pcie1_ctrl | > > > + | | | > > > + +-- Core(Link1) <---> pcie_rc2 +-----------------+ > > > + > > > + pcie_rcX is pcie node ("sophgo,sg2042-pcie-host") defined in DTS. > > > + cdns_pcie0_ctrl is syscon node ("sophgo,sg2042-pcie-ctrl") defined in DTS > > > + > > > + cdns_pcieX_ctrl contains some registers shared by pcie_rcX, even two > > > + RC(Link)s may share different bits of the same register. For example, > > > + cdns_pcie1_ctrl contains registers shared by link0 & link1 for Cadence IP 2. > > An RC doesn't have a Link. A Root Port does. > > > > > + "sophgo,pcie-port" is defined to flag which core(link) the rc maps to, with > > > + this we can know what registers(bits) we should use. > > > + > > > + sophgo,syscon-pcie-ctrl: > > > + $ref: /schemas/types.yaml#/definitions/phandle > > > + description: > > > + Phandle to the PCIe System Controller DT node. It's required to > > > + access some MSI operation registers shared by PCIe RCs. > > I think this probably means "shared by PCIe Root Ports", not RCs. > > It's unlikely that this hardware has multiple Root Complexes. > > I just double confirmed with sophgo engineers, they told me that the actual > PCIe design is that there is only one root port under a host bridge. I am > sorry that my original description and diagram may not make this clear, so > please allow me to introduce this historical background in detail again. > Please read it patiently :): > > The IP provided by Cadence contains two independent cores (called "links" > according to the terminology of their manual, the first one is called link0 > and the second one is called link1). Each core corresponds to a host bridge, > and each host bridge has only one root port, and their configuration > registers are completely independent. That is to say,one cadence IP > encapsulates two independent host bridges. SG2042 integrates two Cadence > IPs, so there can actually be up to four host bridges. > > > Taking a Cadence IP as an example, the two host bridges can be connected to > different lanes through configuration, which has been described in the > original message. At present, the configuration of SG2042 is to let core0 > (link0) in the first ip occupy all lanes in the ip, and let core0 (link0) > and core1 (link1) in the second ip each use half of the lanes in the ip. So > in the end we only use 3 cores, that's why 3 host bridge nodes are > configured in dts. Host bridges are logically separate PCI hierarchies, so these three host bridges could be in three separate PCI domains, and each one could use buses 00-ff. Each one contains a single Root Port, so enumerating could look like this: 0000:00:00.0 Root Port to [bus 01-ff] 0001:00:00.0 Root Port to [bus 01-ff] 0002:00:00.0 Root Port to [bus 01-ff] Does that match with your understanding?