From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Back when this device tree was first added, there were no i.MX8MP HDMI bindings upstream yet. This has changed now, so let's use them to describe the HDMI on the imx8mp-skov-revb-hdmi board. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- v1 -> v2: - no change --- .../boot/dts/freescale/imx8mp-skov-revb-hdmi.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts index 206116be816662349ef5b54e288b945f171f5637..32a429437cbdbd153e6efb2bff6cd16e20ecb423 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts @@ -9,6 +9,21 @@ / { compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp"; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c5 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; @@ -19,6 +34,10 @@ &i2c5 { status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &iomuxc { pinctrl_hdmi: hdmigrp { fsl,pins = < -- 2.39.5