The patch not only performs the conversion according to the JSON-schema but also adds the missing parts: - st,syscfg phandle - st,stm32h743-rcc compatible that were not documented but are still used by the drivers and must therefore be included to ensure the patch submission tests do not fail. Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> --- .../bindings/clock/st,stm32-rcc.txt | 138 ----------------- .../bindings/clock/st,stm32-rcc.yaml | 143 ++++++++++++++++++ 2 files changed, 143 insertions(+), 138 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/st,stm32-rcc.txt create mode 100644 Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt deleted file mode 100644 index cfa04b614d8a..000000000000 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ /dev/null @@ -1,138 +0,0 @@ -STMicroelectronics STM32 Reset and Clock Controller -=================================================== - -The RCC IP is both a reset and a clock controller. - -Please refer to clock-bindings.txt for common clock controller binding usage. -Please also refer to reset.txt for common reset controller binding usage. - -Required properties: -- compatible: Should be: - "st,stm32f42xx-rcc" - "st,stm32f469-rcc" - "st,stm32f746-rcc" - "st,stm32f769-rcc" - -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below -- #clock-cells: 2, device nodes should specify the clock in their "clocks" - property, containing a phandle to the clock device node, an index selecting - between gated clocks and other clocks and an index specifying the clock to - use. -- clocks: External oscillator clock phandle - - high speed external clock signal (HSE) - - external I2S clock (I2S_CKIN) - -Example: - - rcc: rcc@40023800 { - #reset-cells = <1>; - #clock-cells = <2> - compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; - reg = <0x40023800 0x400>; - clocks = <&clk_hse>, <&clk_i2s_ckin>; - }; - -Specifying gated clocks -======================= - -The primary index must be set to 0. - -The secondary index is the bit number within the RCC register bank, starting -from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). - -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). - -To simplify the usage and to share bit definition with the reset and clock -drivers of the RCC IP, macros are available to generate the index in -human-readble format. - -For STM32F4 series, the macro are available here: - - include/dt-bindings/mfd/stm32f4-rcc.h - -Example: - - /* Gated clock, AHB1 bit 0 (GPIOA) */ - ... { - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> - }; - - /* Gated clock, AHB2 bit 4 (CRYP) */ - ... { - clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> - }; - -Specifying other clocks -======================= - -The primary index must be set to 1. - -The secondary index is bound with the following magic numbers: - - 0 SYSTICK - 1 FCLK - 2 CLK_LSI (low-power clock source) - 3 CLK_LSE (generated from a 32.768 kHz low-speed external - crystal or ceramic resonator) - 4 CLK_HSE_RTC (HSE division factor for RTC clock) - 5 CLK_RTC (real-time clock) - 6 PLL_VCO_I2S (vco frequency of I2S pll) - 7 PLL_VCO_SAI (vco frequency of SAI pll) - 8 CLK_LCD (LCD-TFT) - 9 CLK_I2S (I2S clocks) - 10 CLK_SAI1 (audio clocks) - 11 CLK_SAI2 - 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) - 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) - - 14 CLK_HSI (Internal ocscillator clock) - 15 CLK_SYSCLK (System Clock) - 16 CLK_HDMI_CEC (HDMI-CEC clock) - 17 CLK_SPDIF (SPDIF-Rx clock) - 18 CLK_USART1 (U(s)arts clocks) - 19 CLK_USART2 - 20 CLK_USART3 - 21 CLK_UART4 - 22 CLK_UART5 - 23 CLK_USART6 - 24 CLK_UART7 - 25 CLK_UART8 - 26 CLK_I2C1 (I2S clocks) - 27 CLK_I2C2 - 28 CLK_I2C3 - 29 CLK_I2C4 - 30 CLK_LPTIMER (LPTimer1 clock) - 31 CLK_PLL_SRC - 32 CLK_DFSDM1 - 33 CLK_ADFSDM1 - 34 CLK_F769_DSI -) - -Example: - - /* Misc clock, FCLK */ - ... { - clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> - }; - - -Specifying softreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the reset device node and an index specifying -which channel to use. -The index is the bit number within the RCC registers bank, starting from RCC -base address. -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register. -For example, for CRC reset: - crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 - -example: - - timer2 { - resets = <&rcc STM32F4_APB1_RESET(TIM2)>; - }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml new file mode 100644 index 000000000000..ae9e5b26d876 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/st,stm32-rcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Reset Clock Controller + +maintainers: + - Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> + +description: | + The RCC IP is both a reset and a clock controller. + + This binding uses common clock and reset bindings + Documentation/devicetree/bindings/clock/clock-bindings.txt + Documentation/devicetree/bindings/reset/reset.txt + + Specifying softreset control of devices + ======================================= + + Device nodes should specify the reset channel required in their "resets" + property, containing a phandle to the reset device node and an index specifying + which channel to use. + The index is the bit number within the RCC registers bank, starting from RCC + base address. + It is calculated as: index = register_offset / 4 * 32 + bit_offset. + Where bit_offset is the bit offset within the register. + + For example, for CRC reset: + crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 + + The list of valid indices is available in: + - include/dt-bindings/mfd/stm32f4-rcc.h for STM32F4 series + - include/dt-bindings/mfd/stm32f7-rcc.h for STM32F7 series + - include/dt-bindings/mfd/stm32h7-rcc.h for STM32H7 series + +properties: + compatible: + oneOf: + - items: + - const: st,stm32f42xx-rcc + - const: st,stm32-rcc + - items: + - enum: + - st,stm32f469-rcc + - const: st,stm32f42xx-rcc + - const: st,stm32-rcc + - items: + - const: st,stm32f746-rcc + - const: st,stm32-rcc + - items: + - enum: + - st,stm32f769-rcc + - const: st,stm32f746-rcc + - const: st,stm32-rcc + - items: + - const: st,stm32h743-rcc + - const: st,stm32-rcc + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + '#clock-cells': + enum: [1, 2] + + clocks: + minItems: 2 + maxItems: 3 + + st,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to system configuration controller. It can be used to control the + power domain circuitry. + +required: + - compatible + - reg + - '#reset-cells' + - '#clock-cells' + - clocks + - st,syscfg + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32h743-rcc + then: + properties: + '#clock-cells': + const: 1 + description: | + The clock index for the specified type. + else: + properties: + '#clock-cells': + const: 2 + description: | + - The first cell is the clock type, possible values are 0 for + gated clocks and 1 otherwise. + - The second cell is the clock index for the specified type. + +additionalProperties: false + +examples: + # Reset and Clock Control Module node: + - | + rcc@40023800 { + #reset-cells = <1>; + #clock-cells = <2>; + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + }; + + - | + rcc@40023800 { + #reset-cells = <1>; + #clock-cells = <2>; + compatible = "st,stm32f746-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + }; + + - | + rcc@58024400 { + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>; + st,syscfg = <&pwrcfg>; + }; + +... -- 2.43.0