Add binding for the EC found in the Huawei Matebook E Go and Huawei Matebook E Go LTE 2-in-1 tablets, the former one is a QS sc8280xp based tablet, the latter one is QS sc8180x based tablet. This series has a codename, gaokun. More information about gaokun, please check https://bugzilla.kernel.org/show_bug.cgi?id=219645 Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx> --- .../bindings/platform/huawei,gaokun-ec.yaml | 127 ++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml diff --git a/Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml b/Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml new file mode 100644 index 000000000..149c0cbe4 --- /dev/null +++ b/Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/platform/huawei,gaokun-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Huawei Matebook E Go Embedded Controller + +maintainers: + - Pengyu Luo <mitltlatltl@xxxxxxxxx> + +description: + Different from other Qualcomm Snapdragon sc8180x and sc8280xp-based + machines, the Huawei Matebook E Go tablets use embedded controllers + while others use a system called PMIC GLink which handles battery, + UCSI, USB Type-C DP Alt Mode. In addition, Huawei's implementation + also handles additional features, such as charging thresholds, FN + lock, smart charging, tablet lid status, thermal sensors, and more. + +properties: + compatible: + items: + - enum: + - huawei,gaokun2 + - huawei,gaokun3 + - const: huawei,gaokun-ec + + reg: + const: 0x38 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + +patternProperties: + '^connector@[01]$': + $ref: /schemas/connector/usb-connector.yaml# + + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@38 { + compatible = "huawei,gaokun3", "huawei,gaokun-ec"; + reg = <0x38>; + + interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi0_ss_in: endpoint { + remote-endpoint = <&usb_0_qmpphy_out>; + }; + }; + + port@1 { + reg = <1>; + + ucsi0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi1_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@1 { + reg = <1>; + + ucsi1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + }; -- 2.47.1
