Enable MMC for the Samsung Galaxy S8, used as external microSD card
storage. Since the main PMIC is currently not supported, assume the
required regulators are enabled by the previous bootloader.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
---
.../boot/dts/exynos/exynos8895-dreamlte.dts | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
index 3a376ab2b..6c4f8d4a9 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
@@ -16,6 +16,10 @@ / {
compatible = "samsung,dreamlte", "samsung,exynos8895";
chassis-type = "handset";
+ aliases {
+ mmc0 = &mmc;
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <1>;
@@ -95,6 +99,27 @@ &oscclk {
clock-frequency = <26000000>;
};
+&mmc {
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+ clock-frequency = <800000000>;
+ disable-wp;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+
+ /* TODO: Add regulators once PMIC is implemented */
+
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-sdr-timing = <0 3>;
+
+ status = "okay";
+};
+
&pinctrl_alive {
key_power: key-power-pins {
samsung,pins = "gpa2-4";
@@ -123,4 +148,11 @@ key_wink: key-wink-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
+
+ sd2_cd: sd2-cd-pins {
+ samsung,pins = "gpa1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ };
};
--
2.43.0
