Add bootph-pre-ram hinting to jh7110-common.dtsi:
- i2c5_pins and i2c-pins subnode for connection to eeprom
- eeprom node
- qspi flash configuration subnode
- memory node
- uart0 for serial console
With this the U-Boot SPL secondary program loader may drop such
overrides when using dt-rebasing with JH7110 OF_UPSTREAM board targets.
Signed-off-by: E Shattow <e@xxxxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index ad5cb85ebc59..99de0750d049 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -28,6 +28,7 @@ chosen {
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x1 0x0>;
+ bootph-pre-ram;
};
gpio-restart {
@@ -247,6 +248,7 @@ emmc_vdd: aldo4 {
};
eeprom: eeprom@50 {
+ bootph-pre-ram;
compatible = "atmel,24c04";
reg = <0x50>;
pagesize = <16>;
@@ -323,6 +325,7 @@ &qspi {
nor_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
+ bootph-pre-ram;
cdns,read-delay = <2>;
spi-max-frequency = <100000000>;
cdns,tshsl-ns = <1>;
@@ -406,6 +409,7 @@ GPOEN_SYS_I2C2_DATA,
};
i2c5_pins: i2c5-0 {
+ bootph-pre-ram;
i2c-pins {
pinmux = <GPIOMUX(19, GPOUT_LOW,
GPOEN_SYS_I2C5_CLK,
@@ -414,6 +418,7 @@ GPI_SYS_I2C5_CLK)>,
GPOEN_SYS_I2C5_DATA,
GPI_SYS_I2C5_DATA)>;
bias-disable; /* external pull-up */
+ bootph-pre-ram;
input-enable;
input-schmitt-enable;
};
@@ -642,6 +647,7 @@ GPOEN_DISABLE,
};
&uart0 {
+ bootph-pre-ram;
clock-frequency = <24000000>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
--
2.45.2
