One of four USB-A ports on the Pine64 Star64 is USB 3.0 which requires to
disable PCIE0 and change the mode of PCIE0 PHY to USB3.0 operation. The
remaining three USB-A ports are USB 2.0 with the USB0 PHY and do not
conflict with any of PCIE0 or PCIE1. PCIE1 (1-lane) routes to a PCIe X4
connector.
Signed-off-by: E Shattow <e@xxxxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b764d4d92fd9..31e825be2065 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -100,3 +100,8 @@ &usb0 {
pinctrl-0 = <&usb0_pins>;
status = "okay";
};
+
+&usb_cdns3 {
+ phys = <&usbphy0>, <&pciephy0>;
+ phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
+};
--
2.45.2
