From: "J. Neuschäfer" <j.ne@xxxxxxxxxx> These features are required (or at least helpful) for running Linux on the LANCOM NWAPP2 board: - GPIO restart/watchdog are required for operation - The MPC83xx-internal watchdog is optional - LEDs are nice to have - ATH9K is on a removable mini-PCIe card - ATH803X is the Ethernet PHY installed on the board Signed-off-by: J. Neuschäfer <j.ne@xxxxxxxxxx> --- arch/powerpc/configs/mpc83xx_defconfig | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 525a4f6ae1ff7b51e365668b430fa46ce4938f19..40dc455517defd42c7dd8a5414531eced79831f2 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -30,6 +30,9 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_ESP=y # CONFIG_IPV6 is not set CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_PCI_MSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set @@ -54,6 +57,7 @@ CONFIG_GIANFAR=y CONFIG_DAVICOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -64,7 +68,17 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_FSL_SPI=y +CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_74X164=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_WATCHDOG=y +CONFIG_GPIO_WATCHDOG=y +CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y +CONFIG_8xxx_WDT=y +CONFIG_REGULATOR=y CONFIG_HID_A4TECH=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y @@ -82,6 +96,13 @@ CONFIG_USB=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_CLASS_MULTICOLOR=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GROUP_MULTICOLOR=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y -- 2.45.2
