Hi Rob,
On 2024/11/16 3:34, Rob Herring (Arm) wrote:
> Remove "enable-dma" property which is both unused in the kernel and
> undocumented. Most likely they are leftovers from downstream.
>
> Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index a589954c29e2..12f621cedf89 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -728,7 +728,6 @@ spi0: spi@f7106000 {
> reg = <0x0 0xf7106000 0x0 0x1000>;
> interrupts = <0 50 4>;
> bus-id = <0>;
> - enable-dma = <0>;
> clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
> clock-names = "sspclk", "apb_pclk";
> pinctrl-names = "default";
>
Thanks!
Since the "enable-dma" and "bus-id" both are not used by the pl022 driver,
when applying this patch, I have removed the "bus-id" and changed the
commit message as well.
The detail is as following:
https://github.com/hisilicon/linux-hisi/commit/4a45f8c502a8b8a836c3c932a18d538856097ac7
Best Regards,
Wei
