Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/amlogic/meson8.dtsi | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index 9ff142d9fe3f..847f7b1f1e96 100644
--- a/arch/arm/boot/dts/amlogic/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -449,7 +449,11 @@ analog_top: analog-top@81a8 {
};
pwm_ef: pwm@86c0 {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+ compatible = "amlogic,meson8-pwm-v2";
+ clocks = <&xtal>,
+ <>, /* unknown/untested, the datasheet calls it "Video PLL" */
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_FCLK_DIV3>;
reg = <0x86c0 0x10>;
#pwm-cells = <3>;
status = "disabled";
@@ -699,11 +703,19 @@ timer@600 {
};
&pwm_ab {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+ compatible = "amlogic,meson8-pwm-v2";
+ clocks = <&xtal>,
+ <>, /* unknown/untested, the datasheet calls it "Video PLL" */
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_FCLK_DIV3>;
};
&pwm_cd {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+ compatible = "amlogic,meson8-pwm-v2";
+ clocks = <&xtal>,
+ <>, /* unknown/untested, the datasheet calls it "Video PLL" */
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_FCLK_DIV3>;
};
&rtc {
--
2.47.1
