Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
---
arch/arm/boot/dts/exynos5250.dtsi | 82 +++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 257e2f10525d..916871bb3f05 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -241,13 +241,6 @@
clock-names = "mfc";
};
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
- };
-
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
@@ -276,26 +269,6 @@
};
};
- serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
@@ -778,20 +751,6 @@
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_DP>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- };
-
- fimd: fimd@14400000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
@@ -812,3 +771,44 @@
clock-names = "secss";
};
};
+
+&dp {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_DP>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+};
+
+&fimd {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
