BigTreeTech CB2 and Pi2 are Rockchip RK3566 SoM and SBC boards made by BigTreeTech for the intent of using as a 3d printer control board. It is a successor to the Allwinner H616-based BigTreeTech CB1 and Pi, so the device trees for CB2 and Pi2 are also done in the same manner: the common nodes and properties are put into a dtsi file that the board-specific device trees include. Changes in v3: - Proper formatting and patch series sending (using b4) - Converted spaces to tab indentation in the dtsi file - Fixed empty line where the license identifier should be Changes in v2: - Added bigtreetech cb2 and pi2 boards to the list of platforms - Split BigTreeTech CB2 and Pi2 into two device trees using common dtsi Link to v2 1/2: https://lore.kernel.org/linux-rockchip/20241224135751.350379-2-ivan8215145640@xxxxxxxxx/ Link to v2 2/2: https://lore.kernel.org/linux-rockchip/20241224140057.350667-2-ivan8215145640@xxxxxxxxx/ Link to v1: https://lore.kernel.org/linux-rockchip/20241222203952.84217-2-ivan8215145640@xxxxxxxxx/ Signed-off-by: Ivan Sergeev <ivan8215145640@xxxxxxxxx> --- Ivan Sergeev (2): dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 .../devicetree/bindings/arm/rockchip.yaml | 11 + arch/arm64/boot/dts/rockchip/Makefile | 2 + .../dts/rockchip/rk3566-bigtreetech-cb2-manta.dts | 10 + .../boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi | 941 +++++++++++++++++++++ .../boot/dts/rockchip/rk3566-bigtreetech-pi2.dts | 10 + 5 files changed, 974 insertions(+) --- base-commit: 4bbf9020becbfd8fc2c3da790855b7042fad455b change-id: 20241224-bigtreetech-cb2-18944b349916 Best regards, -- Ivan Sergeev <ivan8215145640@xxxxxxxxx>
