Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588. Enable it on Edgeble-6TOPS IO Board dtsi. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxx> --- .../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi index 7125790bbed2..4883b31ddeaf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi @@ -4,12 +4,24 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/soc/rockchip,vop2.h> / { chosen { stdout-path = "serial2:1500000n8"; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + /* Unnamed gated oscillator: 100MHz,3.3V,3225 */ pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator { compatible = "gated-fixed-clock"; @@ -81,6 +93,26 @@ &combphy2_psu { status = "okay"; }; +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdptxphy_hdmi1 { + status = "okay"; +}; + &i2c6 { status = "okay"; @@ -275,3 +307,18 @@ &usb_host1_ohci { &usb_host2_xhci { status = "okay"; }; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp0>; + }; +}; -- 2.34.1