From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
Add pinctrl device to support Amlogic A4 and add uart pinconf.
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 133 ++++++++++++++++++++++++++++
1 file changed, 133 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index de10e7aebf21..90ef74b015bd 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -5,6 +5,7 @@
#include "amlogic-a4-common.dtsi"
#include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
/ {
cpus {
#address-cells = <2>;
@@ -48,3 +49,135 @@ pwrc: power-controller {
};
};
};
+
+&apb {
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-a4";
+ reg = <0x0 0x4000 0x0 0x0050>,
+ <0x0 0x40c0 0x0 0x0220>;
+ reg-names = "mux", "gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpiox: gpio@10 {
+ reg = <0x10>, <0x3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <18>;
+ identity = <AMLOGIC_GPIO_X>;
+ };
+
+ gpiot: gpio@20 {
+ reg = <0x20>, <0xb>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <23>;
+ identity = <AMLOGIC_GPIO_T>;
+ };
+
+ gpiod: gpio@30 {
+ reg = <0x30>, <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <16>;
+ identity = <AMLOGIC_GPIO_D>;
+ };
+
+ gpioe: gpio@40 {
+ reg = <0x40>, <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <2>;
+ identity = <AMLOGIC_GPIO_E>;
+ };
+
+ gpiob: gpio@60 {
+ reg = <0x60>, <0x0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <14>;
+ identity = <AMLOGIC_GPIO_B>;
+ };
+
+ func-uart-a {
+ uart_a_default: uart-a-pins1 {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_X, 11, AF1)>,
+ <AML_PINMUX(AMLOGIC_GPIO_X, 12, AF1)>,
+ <AML_PINMUX(AMLOGIC_GPIO_X, 13, AF1)>,
+ <AML_PINMUX(AMLOGIC_GPIO_X, 14, AF1)>;
+ };
+
+ uart-a-pins2 {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_D, 2, AF3)>,
+ <AML_PINMUX(AMLOGIC_GPIO_D, 3, AF3)>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ func-uart-b {
+ uart_b_default: uart-b-pins {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_E, 0, AF3)>,
+ <AML_PINMUX(AMLOGIC_GPIO_E, 1, AF3)>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ func-uart-d {
+ uart_d_default: uart-d-pins1 {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_T, 18, AF4)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 19, AF4)>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+
+ uart-d-pins2 {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_T, 7, AF2)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 8, AF2)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 9, AF2)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 10, AF2)>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ func-uart-e {
+ uart_e_default: uart-e-pins {
+ pinmux= <AML_PINMUX(AMLOGIC_GPIO_T, 14, AF3)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 15, AF3)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 16, AF3)>,
+ <AML_PINMUX(AMLOGIC_GPIO_T, 17, AF3)>;
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+ };
+
+ aobus_pinctrl: pinctrl@8e700 {
+ compatible = "amlogic,pinctrl-a4";
+ reg = <0x0 0x8e700 0x0 0x04>,
+ <0x0 0x8e704 0x0 0x60>;
+ reg-names = "mux", "gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpioao: gpio@0 {
+ reg = <0x0>, <0x0>;
+ mask = <0xfffffff>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <7>;
+ identity = <AMLOGIC_GPIO_AO>;
+ };
+
+ test_n: gpio@10 {
+ reg = <0x10>, <0x0>;
+ mask = <0xf0000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <1>;
+ identity = <AMLOGIC_GPIO_TEST_N>;
+ };
+ };
+};
--
2.37.1
