From: Steven Liu <steven.liu@xxxxxxxxxxxxxx>
Add support for the 5 GPIO banks in the rk3562.
Signed-off-by: Steven Liu <steven.liu@xxxxxxxxxxxxxx>
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
Changes in v2:
- collect review tag
drivers/pinctrl/pinctrl-rockchip.c | 200 ++++++++++++++++++++++++++++-
drivers/pinctrl/pinctrl-rockchip.h | 3 +-
2 files changed, 200 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 36d4eaf0ebd1..15145882950f 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Pinctrl driver for Rockchip SoCs
- *
+ * Copyright (c) 2020-2024 Rockchip Electronics Co., Ltd.
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@xxxxxxxxx>
*
@@ -2003,6 +2003,151 @@ static int rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
return 0;
}
+#define RK3562_DRV_BITS_PER_PIN 8
+#define RK3562_DRV_PINS_PER_REG 2
+#define RK3562_DRV_GPIO0_OFFSET 0x20070
+#define RK3562_DRV_GPIO1_OFFSET 0x200
+#define RK3562_DRV_GPIO2_OFFSET 0x240
+#define RK3562_DRV_GPIO3_OFFSET 0x10280
+#define RK3562_DRV_GPIO4_OFFSET 0x102C0
+
+static int rk3562_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ switch (bank->bank_num) {
+ case 0:
+ *reg = RK3562_DRV_GPIO0_OFFSET;
+ break;
+
+ case 1:
+ *reg = RK3562_DRV_GPIO1_OFFSET;
+ break;
+
+ case 2:
+ *reg = RK3562_DRV_GPIO2_OFFSET;
+ break;
+
+ case 3:
+ *reg = RK3562_DRV_GPIO3_OFFSET;
+ break;
+
+ case 4:
+ *reg = RK3562_DRV_GPIO4_OFFSET;
+ break;
+
+ default:
+ dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+ break;
+ }
+
+ *reg += ((pin_num / RK3562_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RK3562_DRV_PINS_PER_REG;
+ *bit *= RK3562_DRV_BITS_PER_PIN;
+
+ return 0;
+}
+
+#define RK3562_PULL_BITS_PER_PIN 2
+#define RK3562_PULL_PINS_PER_REG 8
+#define RK3562_PULL_GPIO0_OFFSET 0x20020
+#define RK3562_PULL_GPIO1_OFFSET 0x80
+#define RK3562_PULL_GPIO2_OFFSET 0x90
+#define RK3562_PULL_GPIO3_OFFSET 0x100A0
+#define RK3562_PULL_GPIO4_OFFSET 0x100B0
+
+static int rk3562_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ switch (bank->bank_num) {
+ case 0:
+ *reg = RK3562_PULL_GPIO0_OFFSET;
+ break;
+
+ case 1:
+ *reg = RK3562_PULL_GPIO1_OFFSET;
+ break;
+
+ case 2:
+ *reg = RK3562_PULL_GPIO2_OFFSET;
+ break;
+
+ case 3:
+ *reg = RK3562_PULL_GPIO3_OFFSET;
+ break;
+
+ case 4:
+ *reg = RK3562_PULL_GPIO4_OFFSET;
+ break;
+
+ default:
+ dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+ break;
+ }
+
+ *reg += ((pin_num / RK3562_PULL_PINS_PER_REG) * 4);
+ *bit = pin_num % RK3562_PULL_PINS_PER_REG;
+ *bit *= RK3562_PULL_BITS_PER_PIN;
+
+ return 0;
+}
+
+#define RK3562_SMT_BITS_PER_PIN 2
+#define RK3562_SMT_PINS_PER_REG 8
+#define RK3562_SMT_GPIO0_OFFSET 0x20030
+#define RK3562_SMT_GPIO1_OFFSET 0xC0
+#define RK3562_SMT_GPIO2_OFFSET 0xD0
+#define RK3562_SMT_GPIO3_OFFSET 0x100E0
+#define RK3562_SMT_GPIO4_OFFSET 0x100F0
+
+static int rk3562_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num,
+ struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ switch (bank->bank_num) {
+ case 0:
+ *reg = RK3562_SMT_GPIO0_OFFSET;
+ break;
+
+ case 1:
+ *reg = RK3562_SMT_GPIO1_OFFSET;
+ break;
+
+ case 2:
+ *reg = RK3562_SMT_GPIO2_OFFSET;
+ break;
+
+ case 3:
+ *reg = RK3562_SMT_GPIO3_OFFSET;
+ break;
+
+ case 4:
+ *reg = RK3562_SMT_GPIO4_OFFSET;
+ break;
+
+ default:
+ dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+ break;
+ }
+
+ *reg += ((pin_num / RK3562_SMT_PINS_PER_REG) * 4);
+ *bit = pin_num % RK3562_SMT_PINS_PER_REG;
+ *bit *= RK3562_SMT_BITS_PER_PIN;
+
+ return 0;
+}
+
#define RK3568_PULL_PMU_OFFSET 0x20
#define RK3568_PULL_GRF_OFFSET 0x80
#define RK3568_PULL_BITS_PER_PIN 2
@@ -2495,7 +2640,8 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
rmask_bits = RK3588_DRV_BITS_PER_PIN;
ret = strength;
goto config;
- } else if (ctrl->type == RK3568) {
+ } else if (ctrl->type == RK3562 ||
+ ctrl->type == RK3568) {
rmask_bits = RK3568_DRV_BITS_PER_PIN;
ret = (1 << (strength + 1)) - 1;
goto config;
@@ -2639,6 +2785,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
case RK3328:
case RK3368:
case RK3399:
+ case RK3562:
case RK3568:
case RK3576:
case RK3588:
@@ -2699,6 +2846,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
case RK3328:
case RK3368:
case RK3399:
+ case RK3562:
case RK3568:
case RK3576:
case RK3588:
@@ -2810,6 +2958,7 @@ static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num)
data >>= bit;
switch (ctrl->type) {
+ case RK3562:
case RK3568:
return data & ((1 << RK3568_SCHMITT_BITS_PER_PIN) - 1);
default:
@@ -2839,6 +2988,7 @@ static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
/* enable the write to the equivalent lower bits */
switch (ctrl->type) {
+ case RK3562:
case RK3568:
data = ((1 << RK3568_SCHMITT_BITS_PER_PIN) - 1) << (bit + 16);
rmask = data | (data >> 16);
@@ -2965,6 +3115,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
case RK3328:
case RK3368:
case RK3399:
+ case RK3562:
case RK3568:
case RK3576:
case RK3588:
@@ -4086,6 +4237,49 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
.drv_calc_reg = rk3399_calc_drv_reg_and_bit,
};
+static struct rockchip_pin_bank rk3562_pin_banks[] = {
+ PIN_BANK_IOMUX_FLAGS_OFFSET(0, 32, "gpio0",
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ 0x20000, 0x20008, 0x20010, 0x20018),
+ PIN_BANK_IOMUX_FLAGS_OFFSET(1, 32, "gpio1",
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ 0, 0x08, 0x10, 0x18),
+ PIN_BANK_IOMUX_FLAGS_OFFSET(2, 32, "gpio2",
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ 0x20, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS_OFFSET(3, 32, "gpio3",
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ 0x10040, 0x10048, 0x10050, 0x10058),
+ PIN_BANK_IOMUX_FLAGS_OFFSET(4, 16, "gpio4",
+ IOMUX_WIDTH_4BIT,
+ IOMUX_WIDTH_4BIT,
+ 0,
+ 0,
+ 0x10060, 0x10068, 0, 0),
+};
+
+static struct rockchip_pin_ctrl rk3562_pin_ctrl __maybe_unused = {
+ .pin_banks = rk3562_pin_banks,
+ .nr_banks = ARRAY_SIZE(rk3562_pin_banks),
+ .label = "RK3562-GPIO",
+ .type = RK3562,
+ .pull_calc_reg = rk3562_calc_pull_reg_and_bit,
+ .drv_calc_reg = rk3562_calc_drv_reg_and_bit,
+ .schmitt_calc_reg = rk3562_calc_schmitt_reg_and_bit,
+};
+
static struct rockchip_pin_bank rk3568_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
@@ -4210,6 +4404,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
.data = &rk3368_pin_ctrl },
{ .compatible = "rockchip,rk3399-pinctrl",
.data = &rk3399_pin_ctrl },
+ { .compatible = "rockchip,rk3562-pinctrl",
+ .data = &rk3562_pin_ctrl },
{ .compatible = "rockchip,rk3568-pinctrl",
.data = &rk3568_pin_ctrl },
{ .compatible = "rockchip,rk3576-pinctrl",
diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h
index 6ebbb0a88ce7..87a20cec8e21 100644
--- a/drivers/pinctrl/pinctrl-rockchip.h
+++ b/drivers/pinctrl/pinctrl-rockchip.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2020-2021 Rockchip Electronics Co. Ltd.
+ * Copyright (c) 2020-2024 Rockchip Electronics Co., Ltd.
*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@xxxxxxxxx>
@@ -196,6 +196,7 @@ enum rockchip_pinctrl_type {
RK3328,
RK3368,
RK3399,
+ RK3562,
RK3568,
RK3576,
RK3588,
--
2.25.1
