rk3576 has two pcie controllers, both are pcie2x1 work with
naneng-combphy.
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
Changes in v3:
- Update the subject
Changes in v2:
- Update clock and reset names and sequence to pass DTB check
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 109 +++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index a147879da501..0486525fe596 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1016,6 +1016,115 @@ qos_npu_m1ro: qos@27f22100 {
reg = <0x0 0x27f22100 0x0 0x20>;
};
+ pcie0: pcie@2a200000 {
+ compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ clocks = <&cru ACLK_PCIE0_MST>, <&cru ACLK_PCIE0_SLV>,
+ <&cru ACLK_PCIE0_DBI>, <&cru PCLK_PCIE0>,
+ <&cru CLK_PCIE0_AUX>;
+
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
+ linux,pci-domain = <0>;
+ num-ib-windows = <8>;
+ num-viewport = <8>;
+ num-ob-windows = <2>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ phys = <&combphy0_ps PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3576_PD_PHP>;
+ ranges = <0x01000000 0x0 0x20100000 0x0 0x20100000 0x0 0x00100000
+ 0x02000000 0x0 0x20200000 0x0 0x20200000 0x0 0x00e00000
+ 0x03000000 0x9 0x00000000 0x9 0x00000000 0x0 0x80000000>;
+ reg = <0x0 0x22000000 0x0 0x00400000>,
+ <0x0 0x2a200000 0x0 0x00010000>,
+ <0x0 0x20000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+ reset-names = "pwr", "pipe";
+ status = "disabled";
+
+ pcie0_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ pcie1: pcie@2a210000 {
+ compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x20 0x2f>;
+ clocks = <&cru ACLK_PCIE1_MST>, <&cru ACLK_PCIE1_SLV>,
+ <&cru ACLK_PCIE1_DBI>, <&cru PCLK_PCIE1>,
+ <&cru CLK_PCIE1_AUX>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
+ linux,pci-domain = <0>;
+ num-ib-windows = <8>;
+ num-viewport = <8>;
+ num-ob-windows = <2>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ phys = <&combphy1_psu PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3576_PD_SUBPHP>;
+ ranges = <0x01000000 0x0 0x21100000 0x0 0x21100000 0x0 0x00100000
+ 0x02000000 0x0 0x21200000 0x0 0x21200000 0x0 0x00e00000
+ 0x03000000 0x9 0x80000000 0x9 0x80000000 0x0 0x80000000>;
+ reg = <0x0 0x22400000 0x0 0x00400000>,
+ <0x0 0x2a210000 0x0 0x00010000>,
+ <0x0 0x21000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+ reset-names = "pwr", "pipe";
+ status = "disabled";
+
+ pcie1_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
gmac0: ethernet@2a220000 {
compatible = "rockchip,rk3576-gmac", "snps,dwmac-4.20a";
reg = <0x0 0x2a220000 0x0 0x10000>;
--
2.25.1
