Re: [PATCH] ARM: dts: ti: am437x-l4: remove autoidle for UART

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 20, 2024 at 04:35:23PM -0600, Judith Mendez wrote:
> According to the TRM [0] in 21.5.1.42 UART_SYSC Register,
> the autoidle bit should not be set for UART, so remove the
> appropriate SYSC_OMAP2_AUTOIDLE flag.
> 
> [0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
>  arch/arm/boot/dts/ti/omap/am437x-l4.dtsi | 18 ++++++------------
>  1 file changed, 6 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> index 824b9415ebbe9..fd4634f8c6293 100644
> --- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> +++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
> @@ -180,8 +180,7 @@ target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
>  			      <0x9058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> @@ -698,8 +697,7 @@ target-module@22000 {			/* 0x48022000, ap 8 0a.0 */
>  			      <0x22058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> @@ -726,8 +724,7 @@ target-module@24000 {			/* 0x48024000, ap 10 1c.0 */
>  			      <0x24058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> @@ -1385,8 +1382,7 @@ target-module@a6000 {			/* 0x481a6000, ap 40 16.0 */
>  			      <0xa6058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> @@ -1413,8 +1409,7 @@ target-module@a8000 {			/* 0x481a8000, ap 42 20.0 */
>  			      <0xa8058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> @@ -1441,8 +1436,7 @@ target-module@aa000 {			/* 0x481aa000, ap 44 12.0 */
>  			      <0xaa058 0x4>;
>  			reg-names = "rev", "sysc", "syss";
>  			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> -					 SYSC_OMAP2_SOFTRESET |
> -					 SYSC_OMAP2_AUTOIDLE)>;
> +					 SYSC_OMAP2_SOFTRESET)>;
>  			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
>  					<SYSC_IDLE_NO>,
>  					<SYSC_IDLE_SMART>,
> -- 
> 2.47.1
>

Looks good to me.

Reviewed-by: Sukrut Bellary <sbellary@xxxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux