From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.
A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
Signed-off-by: Ryan Walklin <ryan@xxxxxxxxxxxxx>
---
.../bindings/sound/allwinner,sun4i-a10-codec.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index ebc9097f936ad..b4b711e80b65a 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -98,6 +98,10 @@ properties:
maxItems: 1
description: GPIO to enable the external amplifier
+ allwinner,hp-det-gpios:
+ maxItems: 1
+ description: GPIO for headphone/line-out detection
+
required:
- "#sound-dai-cells"
- compatible
@@ -247,8 +251,10 @@ allOf:
allwinner,audio-routing:
items:
enum:
+ - Headphone
- LINEOUT
- Line Out
+ - Speaker
dmas:
items:
--
2.47.1
