From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Bananapi R4 Board contains a MT6682A pmic which is compatible to rt5190a.
Add its node to the i2 controller.
The BananaPi R4 board has a MediaTek MT6682A PMIC, a rebrand of the
Richtek RT5190A chip, connected to the I2C0 bus.
Add the relevant node and, while at it, also configure the regulators
from this PMIC that are used on this board.
Only Buck2/Buck3 voltage can be controlled by software.
BUCK4 input is 5V from BUCK1 output, and the resistor (mapped to RP30/RP31
on BPI-R4) configures BUCK4 output to 1.8V.
LDO input is 3.3V from 3.3VD, and the resistor (mapped to RP38/RP40 on
BPI-R4) configures LDO output to 1.8V.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
v8:
- fixed buck4 and ldo voltage and extended commit-Message
- readded (send separately) after verifying with mtk
- left RB from angelo as this is imho only minor change
v7:
- dropped this patch due to voltage mismatch compared to schematic
v4:
- change regulator-allowed-modes of pmic as 2 items
v3:
- change commit title and text
---
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index d6f1fca3323c..27edc6b84f80 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -3,6 +3,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
#include "mt7988a.dtsi"
@@ -66,6 +67,55 @@ &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
+
+ rt5190a_64: rt5190a@64 {
+ compatible = "richtek,rt5190a";
+ reg = <0x64>;
+ vin2-supply = <&rt5190_buck1>;
+ vin3-supply = <&rt5190_buck1>;
+ vin4-supply = <&rt5190_buck1>;
+
+ regulators {
+ rt5190_buck1: buck1 {
+ regulator-name = "rt5190a-buck1";
+ regulator-min-microvolt = <5090000>;
+ regulator-max-microvolt = <5090000>;
+ regulator-allowed-modes =
+ <RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ buck2 {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ rt5190_buck3: buck3 {
+ regulator-name = "vproc";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ };
+ buck4 {
+ regulator-name = "rt5190a-buck4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allowed-modes =
+ <RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo {
+ regulator-name = "rt5190a-ldo";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c2 {
--
2.43.0
