On Thu, Apr 16, 2015 at 04:59:31PM +0900, Chanwoo Choi wrote:
> On 04/16/2015 04:13 PM, Ivan T. Ivanov wrote:
> > Hi,
> >
> > On Thu, 2015-04-16 at 16:00 +0900, Chanwoo Choi wrote:
> >> Hi Peter,
> >>
> >> On 04/16/2015 10:59 AM, Peter Chen wrote:
> >>>
> >
> >>> Ok, from USB point, external id/vbus value can't decide
> >>> which role the controller will be, the controller driver
> >>> will decide role according to many things, eg, user configurations,
> >>> id/vbus value, OTG HNP, etc.
> >>>
> >>> So, from USB controller/phy driver, it doesn't care which cable is
> >>> inserted, it cares about id/vbus value. Eg, it can get id/vbus value
> >>> and it will be notified when the id/vbus value has changed.
> >>
> >> OK, I change the notifier name and add notifier events as following:
> >>
> >> - extcon_{register|unregister}_usb_notifier(struct extcon_dev *edev, struct notifier_block *nb);
> >> - list of notifier events
> >> #define EXTCON_USB_ID_L_VBUS_L0 /* ID low and VBUS low */
> >> #define EXTCON_USB_ID_L_VBUS_H1 /* ID low and VBUS high */
> >> #define EXTCON_USB_ID_H_VBUS_L2 /* ID high and VBUS low */
> >> #define EXTCON_USB_ID_H_VBUS_H3 /* ID high and VBUS high */
> >
> > I am still confused, why we mix ID and VBUS events into one?
> > Those are two lines and they are not necessarily handled by
> > the same extcon_dev.
>
> IMO, if some usb driver check both id and vbus pin at the same time,
> the usb driver can know the both id and vbus pin state through only one notifier event.
>
> Also,
> If some usb driver want to know the state of id pin except of vbus state,
> when receiving following events, id pin is low.
> #define EXTCON_USB_ID_L_VBUS_L0
> #define EXTCON_USB_ID_L_VBUS_H1
> when receiving following events, id pin is high.
> #define EXTCON_USB_ID_H_VBUS_L2
> #define EXTCON_USB_ID_H_VBUS_H3
> Also, some usb driver would catch the vbus pin state with same method.
>
> But, it is just my opinion. We may use following notifier events for each pin.
> We need to discuss it.
> #define EXTCON_USB_ID_LOW
> #define EXTCON_USB_ID_HIGH
> #define EXTCON_USB_VBUS_LOW
> #define EXTCON_USB_VBUS_HIGH
>
I agree with above definition.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
