On 19.12.24 18:47, Frank Li wrote:
> On Thu, Dec 19, 2024 at 08:25:34AM +0100, Ahmad Fatoum wrote:
>> From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
>>
>> The NXP PCF85063TP RTC we use is capable of up to 400 kHz of SCL clock
>> frequency, so let's make use of this instead of the 100 kHz bus frequency
>> we are currently using.
>
> Increase I2C frequency to 400khz from 100kHz because NXP PCF85063TP RTC
> support it.
Unlike your other suggestions, these is no information lost by rewriting
the commit message as you suggest. I don't mind, but must admit it feels
like bikeshedding. What is your concrete objection to my commit message?
Thanks,
Ahmad
>
> Frank
>
>>
>> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
>> index a683f46fcbab..ec7857db7bf0 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
>> @@ -333,7 +333,7 @@ reg_nvcc_sd2: LDO5 {
>> };
>>
>> &i2c3 {
>> - clock-frequency = <100000>;
>> + clock-frequency = <400000>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_i2c3>;
>> status = "okay";
>>
>> --
>> 2.39.5
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
