From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
On S32G399A-RDB3 boards, an INA231 current sensor is connected over
I2C4 bus.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 94f531be4017..5f8739c068c6 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -40,6 +40,14 @@ &uart1 {
status = "okay";
};
+&i2c4 {
+ ina231@40 {
+ compatible = "ti,ina231";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+};
+
&usdhc0 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc0>;
--
2.45.2
