On Wed, Apr 15, 2015 at 09:43:30PM +0300, Tero Kristo wrote: > On 04/15/2015 05:09 PM, Michael Welling wrote: > >On Wed, Apr 15, 2015 at 09:34:48AM +0300, Tero Kristo wrote: > >>On 04/15/2015 12:17 AM, Michael Welling wrote: > >>>Greetings, > >>> > >>>I have developed an AM3354 based SoM and it uses an external SI5351 clock > >>>generator to drive the clock inputs for an external duart and I2S audio > >>>master clock. With the registration according to the documentation the > >>>reference clock is not being detected and hence the clock generator is > >>>not working as expect. > >>> > >>>After trying many different things, I started to look around the mailing > >>>lists to find information related to this issue. > >>> > >>>I came acrossed post that has the exact same issue: > >>>https://lkml.org/lkml/2013/2/18/468 > >>> > >>>Seeing as the patch did not land upstream, I am wondering if there is > >>>a solution that I am not seeing. > >>> > >>>I am willing to provide a patch given appropriate guidance. > >> > >>Hi Michael, > >> > >>The info on the email you referenced is kind of obsolete, TI SoCs > >>are calling of_clk_init() during boot now, and thus external clock > >>nodes should be registered fine also. Maybe you can provide the > >>actual DTS patch you are trying out so we can help better...? Are > > > >See attached patch and console output. > > I see a bug in your dt data. > > <snip> > > + clocks { > + ref27: ref27 { > + #clock-cells = <0>; > + compatibale = "fixed-clock"; > > This should be compatible, right? DT is annoying in that it doesn't > verify property names. > Ooops. Now the clock appears in /sys/kernel/debug/clk: root@som3517-som200:/sys/kernel/debug/clk# cat clk_summary clock enable_cnt prepare_cnt rate accuracy phase ---------------------------------------------------------------------------------------- ref27 0 0 27000000 0 0 ... There is still an issue with the si5351. I had to comment out the clk_put here for the frequency to show up: http://lxr.free-electrons.com/source/drivers/clk/clk-si5351.c#L1133 Ideas? > + clock-frequency = <27000000>; > + }; > + }; > > -Tero > > > > >>you seeing any boot time error / warning prints for your new clock? > > > >With the debug messages on you see that the reference clock is not being > >detected. > > > >Whilest debugging I found that the of_clk_get is returning an error no matter > >which clock I pass it: > >http://lxr.free-electrons.com/source/drivers/clk/clk-si5351.c#L1131 > > > >> > >>-Tero > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html