IPQ5424 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V10:
- Pick up R-b tag
- Moved interrupt properties above nvmem
arch/arm64/boot/dts/qcom/ipq5424.dtsi | 87 +++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 5e219f900412..a4846dd904b5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -145,6 +145,93 @@ soc@0 {
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
+ efuse@a4000 {
+ compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+ reg = <0 0x000a4000 0 0x741>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_sens9_off: s9@3dc {
+ reg = <0x3dc 0x1>;
+ bits = <4 4>;
+ };
+
+ tsens_sens10_off: s10@3dd {
+ reg = <0x3dd 0x1>;
+ bits = <0 4>;
+ };
+
+ tsens_sens11_off: s11@3dd {
+ reg = <0x3dd 0x1>;
+ bits = <4 4>;
+ };
+
+ tsens_sens12_off: s12@3de {
+ reg = <0x3de 0x1>;
+ bits = <0 4>;
+ };
+
+ tsens_sens13_off: s13@3de {
+ reg = <0x3de 0x1>;
+ bits = <4 4>;
+ };
+
+ tsens_sens14_off: s14@3e5 {
+ reg = <0x3e5 0x2>;
+ bits = <7 4>;
+ };
+
+ tsens_sens15_off: s15@3e6 {
+ reg = <0x3e6 0x1>;
+ bits = <3 4>;
+ };
+
+ tsens_mode: mode@419 {
+ reg = <0x419 0x1>;
+ bits = <0 3>;
+ };
+
+ tsens_base0: base0@419 {
+ reg = <0x419 0x2>;
+ bits = <3 10>;
+ };
+
+ tsens_base1: base1@41a {
+ reg = <0x41a 0x2>;
+ bits = <5 10>;
+ };
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5424-tsens";
+ reg = <0 0x004a9000 0 0x1000>,
+ <0 0x004a8000 0 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "combined";
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base0>,
+ <&tsens_base1>,
+ <&tsens_sens9_off>,
+ <&tsens_sens10_off>,
+ <&tsens_sens11_off>,
+ <&tsens_sens12_off>,
+ <&tsens_sens13_off>,
+ <&tsens_sens14_off>,
+ <&tsens_sens15_off>;
+ nvmem-cell-names = "mode",
+ "base0",
+ "base1",
+ "tsens_sens9_off",
+ "tsens_sens10_off",
+ "tsens_sens11_off",
+ "tsens_sens12_off",
+ "tsens_sens13_off",
+ "tsens_sens14_off",
+ "tsens_sens15_off";
+ #qcom,sensors = <7>;
+ #thermal-sensor-cells = <1>;
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5424-tlmm";
reg = <0 0x01000000 0 0x300000>;
--
2.34.1
