This adds support for the camera subsystem on the Snapdragon 670. Changes since v8 (20241216223019.70155-8-mailingradian@xxxxxxxxx): - revert clocks before interrupts change from v8 (3/5, 5/5) - pre-declare endpoint nodes in dtsi (5/5) - rename camss node to isp@acb3000 (2/5, 5/5) - add Reviewed-by from Krzysztof for camss dt-bindings patch (2/5) - add Reviewed-by from Vladimir for camss dtsi patch (5/5) Changes since v7 (20241210233534.614520-7-mailingradian@xxxxxxxxx): - move regulators to CSIPHY blocks (3/5) - move clocks before interrupts (2/5, 5/5) - sort clocks alphanumerically (2/5, 5/5) - rename example node to generic node name (2/5) Changes since v6 (20241011023724.614584-7-mailingradian@xxxxxxxxx): - set unit address in node name to first address in regs (2/5, 5/5) Changes since v5 (20241001023520.547271-9-mailingradian@xxxxxxxxx): - sort reg and reg-names alphabetically (2/5, 5/5) - drop CCI I2C patches since they are applied (formerly 2/7, 3/7) Changes since v4 (20240904020448.52035-9-mailingradian@xxxxxxxxx): - change camss interrupts to rising edge in dts (7/7) - change IRQs to rising edge in camss dt-bindings example (4/7) - move gcc and ahb clocks in camss dt-bindings example (4/7) - add reviewed-by for camcc dt-bindings patch (1/7) Changes since v3 (20240819221051.31489-7-mailingradian@xxxxxxxxx): - add specific sdm670 compatible for camcc to dt schema and dts (1/7, 6/7) - pick up patch from Bryan for CCI driver (3/7) - stop assigning CCI frequency in dts (7/7) - add maxItems for sdm670 cci clocks (2/7) - remove empty line at top of camss dt schema (4/7) - move regs and reg-names up in camss dt schema (4/7) - move gcc and ahb clocks up in dts and dt schema (4/7, 7/7) - add reviewed-by from Vladimir for CCI dt-bindings patch (2/7) - add reviewed-by from Bryan for dts patch (7/7) - add reviewed-by from Krzysztof for camss dt-bindings patch (4/7) - add rewiew tags for camss driver patch (5/7) Changes since v2 (20240813230037.84004-8-mailingradian@xxxxxxxxx): - drop unnecessary assigned AXI clock frequency (5/5) - drop src clocks from cci (5/5) - add unit name, remove mmio properties from port in example dts (2/5) - correct the reg-names order (2/5) - add parent_dev_ops to csid (3/5) - remove CSID clocks from VFE (3/5) - remove AXI clock from CSIPHY (3/5) - change subsystem part of the commit message summary (3/5) - add reviewed-by (4/5) Changes since v1 (20240806224219.71623-7-mailingradian@xxxxxxxxx): - define dedicated resource structs/arrays for sdm670 (3/5) - separate camcc device tree node into its own patch (4/5) - specify correct dual license (2/5) - add include directives in dt-bindings camss example (2/5) - remove src clocks from dt-bindings (2/5) - remove src clocks from dtsi (5/5) - add power-domain-names to camss (5/5) - specify power domain names (3/5) - restrict cci-i2c clocks (1/5) - populate a commit message with hw info (2/5) - reword commit message (3/5) Richard Acayan (5): dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible dt-bindings: media: camss: Add qcom,sdm670-camss media: qcom: camss: add support for SDM670 camss arm64: dts: qcom: sdm670: add camcc arm64: dts: qcom: sdm670: add camss and cci .../bindings/clock/qcom,sdm845-camcc.yaml | 6 +- .../bindings/media/qcom,sdm670-camss.yaml | 318 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm670.dtsi | 207 ++++++++++++ drivers/media/platform/qcom/camss/camss.c | 191 +++++++++++ 4 files changed, 721 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml -- 2.47.1
