Re: [PATCH v3 00/22] continue mt7988 devicetree work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 17/12/24 10:12, Frank Wunderlich ha scritto:
From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

This series adds some missing labels and new nodes to mt7988 DTS.

based on pinctrl-series
https://patchwork.kernel.org/project/linux-mediatek/list/?series=918572


The whole series is

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Good job!

Cheers,
Angelo

changes:
v3:
- reorder
- small fixes
- add some new patches (t-phy, pcie, mmc overlays)
- dropped pmic and proc-supply for now because we found a mismatch compared with schematic

v2:
- reorder and squash label-commits to where they are used
- add some more nodes
- add changes to bananapi-r4 board
- moving some nodes from SoC dtsi to board dts

Frank Wunderlich (22):
   arm64: dts: mediatek: mt7988: Add reserved memory
   arm64: dts: mediatek: mt7988: Add mmc support
   arm64: dts: mediatek: mt7988: Add lvts node
   arm64: dts: mediatek: mt7988: Add thermal-zone
   arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c
   arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu
   arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling
   arm64: dts: mediatek: mt7988: Disable usb controllers by default
   arm64: dts: mediatek: mt7988: Add t-phy for ssusb1
   arm64: dts: mediatek: mt7988: Add pcie nodes
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog
   arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and
     3v3
   arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc
   arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
   arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
   arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
   arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie

  arch/arm64/boot/dts/mediatek/Makefile         |   3 +
  .../mt7988a-bananapi-bpi-r4-emmc.dtso         |  33 ++
  .../mediatek/mt7988a-bananapi-bpi-r4-sd.dtso  |  31 ++
  .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  | 143 +++++++++
  arch/arm64/boot/dts/mediatek/mt7988a.dtsi     | 303 +++++++++++++++++-
  5 files changed, 506 insertions(+), 7 deletions(-)
  create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
  create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux